A constant temperature drying oven is a commonly used experimental equipment used to test and determine the parameters and performance of electrical, electronic, and other products and materials after high-temperature testing due to changes in temperature environment. The performance of the constant temperature drying oven may decrease due to various problems during use, so maintenance of the constant temperature drying oven is essential. Below, the editor will introduce the maintenance methods of the constant temperature drying oven in detail, hoping to help users better apply the product.
Maintenance methods for constant temperature drying oven
1. Before using an electric constant temperature drying oven, pay attention to whether the power supply voltage used matches. When using, ground the power socket grounding wire according to regulations.
2. Do not squeeze the items inside the box too tightly, and leave space for natural air convection to accelerate the escape of humid air on the top of the wind.
3. When the electric constant temperature drying oven is powered on, do not touch the electrical parts on the left side of the box with your hands or wipe them with a damp cloth or rinse them with water. During maintenance, the power should be cut off.
4. The power cord of the electric constant temperature drying oven should not be wrapped around metal objects or placed in high temperature or humid places to prevent rubber aging and electrical leakage.
5. Do not put flammable or explosive materials in an electric constant temperature drying oven without explosion-proof devices.
6. The electric constant temperature drying oven should regularly check whether the silver contacts of the temperature regulator are hairy or uneven. If so, the contacts can be sanded flat with fine yarn cloth before use, and should be regularly wiped clean with a cleaning cloth to ensure good contact (note that the power must be cut off). Do not collide the metal pipes of indoor temperature regulators to avoid affecting sensitivity.
7. After each use, the power must be completely cut off and the inside and outside of the box should be kept clean regularly. Hang corresponding signs after cleaning is completed.