Installation: This pure water machine is designed for plug and play use, including all consumables and installation materials. Just connect it to a qualified water source (drinking tap water, conductivity (25 ° C)<2000 µ S/cm, total organic carbon (TOC)<1ppm, inlet pressure 1-6 bar, temperature 5-35 ° C), and turn on a wide range power supply (80-264V/50-60Hz).

Operation interface: equipped with a large and intuitive touch screen, with multi language selection function. The unit for displaying conductivity can be adjusted (M Ω. cm or μ S/cm), enabling multi-level conductivity and temperature monitoring of pure and ultrapure water, and temperature compensation through stepless limit adjustment. It can also store water intake reports and all information to ensure absolute traceability of water intake.

Water intake operation: The external water intake distributor is detachable and ergonomic, and can be rotated and vertically adjusted. All water intake functions can be easily executed through the rotary encoder on the water intake distribution handle. If pure water or ultrapure water needs to be taken, the water outlet can be opened by operating the water dispensing handle. After taking water, operate the handle again to close the water outlet.

Consumables replacement: Using quick connect connectors, consumables can be replaced within seconds. When the device detects that consumables need to be replaced, there will be corresponding reminders, and users can replace them according to the prompts to ensure the normal operation and water quality of the pure water machine.

Special feature: Equipped with ECO mode, it can extend the lifespan of the filter by 20%, reduce operating costs and waste. At the same time, the equipment is also equipped with a leak detector with error messages and automatic shut-off of water supply function to ensure the safety of the equipment and laboratory.