Multi parameter water quality analyzerSuitable for large, medium, and small water plants, industrial and mining enterprises, swimming pool disease control centers, and domestic or industrial water with turbidity and residue
Chlorine, total chlorine, compound chlorine, chlorine dioxide, ammonia nitrogen, dissolved oxygen, nitrite, chromium, iron, manganese concentration detection, in order to make the detected water meet the standards
The established water quality standards.
1. Microcomputer, touch sensitive keyboard, high brightness LCD display for numerical values, easy operation, and high cost-effectiveness.
2. The multi parameter water quality analyzer adopts the photoelectric colorimetric principle of spectrophotometry, which is convenient for reagent application. The water sample can be read within a few minutes after being placed in the reagent for reaction. The reagent is packaged in a convenient drip bottle or vacuum packaging.
3. Adopting LED light source automatic control circuit, the light source is stable and solves the problem of preheating required for startup. Its light source has a lifespan of up to 20 years and can be used directly without preheating when turned on.
4. Equipped with ion selective measurement function, the light source automatically switches according to different wavelengths required for measuring parameters such as turbidity, chromaticity, residual chlorine, total chlorine, iron, manganese, copper, and dissolved oxygen. It is suitable for rapid quantitative determination of 11 common indicators in drinking water.
5. The main unit of the multi parameter water quality analyzer can be equipped with a high-power battery, which can be used for quantitative measurement in the field. It can be continuously used for 4 hours after charging for 2 hours, and is ready to use.
6. The multi parameter water quality analyzer stores calibration curves over the full range, with power-off protection, and calibration data will not be lost. It can be automatically zeroed and calibrated at 5 points. The data has non-linear processing and data smoothing functions. The minimum reading of the instrument is 0.01mg/L.