KD-TS8Quality management instrument for molten iron in front of the furnaceAfter years of research and improvement, our company has adopted * materials with higher measurement accuracy and more stable use of the first generation of pre furnace molten iron quality management instrument. The rapid thermal analysis technology before the cast iron furnace takes the solidification temperature curve of the cast iron microstructure formation process as the measured object, and the computer analyzes the solidification temperature curve to obtain the characteristic points of the curve under different compositions. Calculate the carbon equivalent (CE), carbon content (C%), silicon content (Si%), spheroidization rate (SG%), tensile strength (RM) and other properties of molten iron based on the characteristic points of the curve. The detection time of the thermal analyzer is about 1 minute and 30 seconds, and the detection is completed within the waiting time of the molten iron. Then, the composition of the molten iron is adjusted according to the automatically calculated amount of carburizer, ferrosilicon, and scrap steel, and the appropriate composition of the molten iron is obtained before pouring. Greatly improving the yield rate, reducing the time of molten iron in the furnace, and relieving the workload of furnace workers. Effectively improved work efficiency and reduced testing costs and time.

KD-TS8Quality management instrument for molten iron in front of the furnaceMain performance:

1.Instrument specifications:

① Temperature transmitter, military grade motherboard, 19 inch TFT true color widescreen display

② Power supply: AC 220V 50Hz 200W

2Measurement function:

① Iron grade, carbon equivalent, carbon content, silicon content, undercooling, spheroidization rate, tensile strength, etc

② Setting of target material and weight of molten iron

③ Automatically calculate the dosage of carburizer, ferrosilicon, and scrap steel

④ Automatically draw curves of carbon, silicon, carbon equivalent, primary crystallization temperature, and eutectic temperature changes

⑤ Preservation and Reproduction of Data and Information
3. Setting function: 10 inspection lines, 10 target components, and linkage between inspection lines and target materials can be set

4Supplementary function: Calculate the supplementary amount based on the measurement results, comparing it with the target composition, molten iron weight, and yield rate

5Recording function: According to the measurement time sequence, it can record 5000 measurement results and reproduce the process

6Browse function: You can browse the trend distribution chart of the main measurement parameters for data analysis

7Output function: Measurement records can be transferred to other computers for viewing via USB flash drive

KD-TS8Quality management instrument for molten iron in front of the furnaceMain technical parameters:

Measurement Name Measurement range measure quantity essence degree

Temp 0 - 1370℃ F.S±0.01%

CE％ 2.20％－5.00％ ±0.05％

C％ 2.00％－4.80％ ±0.05％

Si％ 0.20％－4.50％ ±0.10％

SG％ 62％－95％ ±10.0％

RM HTl00－HT350 Zui small value

Related product information:Pre furnace molten iron quality management instrument,Pre furnace carbon silicon analyzer,Pre furnace iron liquid quality management instrument，Furnace front molten iron analyzerOnline quality management instrument for molten iron in front of the furnace, carbon silicon analyzer for molten iron in front of the furnace, carbon silicon analyzer, online analyzer for molten iron, quality analyzer for molten iron in front of the furnace, molten iron analyzer, carbon silicon analyzer, thermal analyzer, and thermal analyzer for molten iron in front of the furnace,