HS-25 CNC rocker table

HS-25CNC (Computer Numerical Control)seesawrocking bed

productIntroduction：

HS-25CNC (Computer Numerical Control)Rocking ShakerIt is a table oscillator that can be directly placed in the greenhouse or incubator, and is widely used in the shaking of coomassie blue dyeing and decoloring, the fixation of electrophoresis gel, and the fixation, dyeing and development of silver nitrate dyeing. Further processing of cellulose membrane after electrophoresis conversion. Such as molecular hybridization, antigen antibody staining, and can be used for cell culture and cell membrane transfer. Laboratory sample bottles, such as culture dishes, triangular flasks, and culture bottles, can be placed on top and shaken.

Product Features:

ØIt can achieve an upper and lower hem width of7The wave motion of the degree (the swing amplitude can be customized as needed) causes the liquid in the container to produce gentle wave like motion.

ØSpecially made silicone anti slip pad, used in conjunction with fastening straps, suitable for operating most culture bottles and dishes.

ØHigh efficiency DC motor is selected for driving, which runs smoothly with low noise and long service life.

ØDigital adjustment of time and speed allows for easy implementation of timed, constant speed, and continuous operation modes.

ØLCDDisplay speed, time, and working mode for easy reading and setting.

ØWide voltage design effectively avoids interference from unstable power supply on the instrument.

Technical Specifications:

Operation mode:Swing up and down
tilt angle：9Degree (customizable)7-12Degree)
Allowable load-bearing capacity:10kg
Speed range:10-80rpm
Time setting range:1-19h59min
Operation mode: timed/continuous
input voltage(frequency)：AC100-240V(50/60Hz)
Input power:40W
Working face size:280*320mm

Shell protection level:IP21
Allowable ambient temperature:5-50℃
Allowable relative humidity:80%
Overall dimensions:420×355×180mm
Net weight:11.5Kg