The safe operation and maintenance procedures of the digital brain stereotaxic device are crucial for ensuring the accuracy of surgery and the safety of patients. The following are detailed safety operation and maintenance procedures:
Safety operating procedures
Pre-operation preparation
Operators must be familiar with the instructions and operating procedures of the equipment, and anyone who is not familiar with the operating procedures must not operate the equipment.
Before use, carefully check whether the instrument is complete, without any exposed or damaged wires.
Check if all parts of the equipment are installed properly, and if there are any signs of looseness, damage, deformation, or wear.
The instrument should be placed on a level and stable workbench to prevent the equipment from shaking.
Wear gloves and hats, and prepare surgical towels, disinfectant gauze, and other items.
operating process
After connecting the power, the instrument should perform a performance self-test to ensure that each functional module is working properly.
Fix the patient's head and adjust the angle of the instrument to align it with the patient's brain normally.
Start the device, perform stereo scanning, adjust the angle and height of the scanning instrument, and determine the normal scanning range.
Determine the position and size of the surgical incision based on the scan results.
Operators should remain calm and follow the correct operating procedures to avoid excessive excitement or rapid movements, which may affect the accuracy and safety of the surgery.
post-operation processing
After the surgery, the instrument should be immediately turned off and the power plug should be unplugged to avoid any problems with the power and instrument.
Clean equipment and accessories, use appropriate disinfection methods to ensure equipment hygiene and safety.
Maintenance Regulations
routine maintenance
Before and after use, the equipment and accessories should be cleaned to remove stains, scan for residues, etc.
When cleaning, clean wiping cloths, disinfectant gauze, and other items should be used to avoid using corrosive substances such as water and chemicals for cleaning.
Regularly inspect, replace, and clean the equipment filter to ensure the cleanliness of the air inhaled by the instrument.
regular maintenance
Regularly check the power cord and plug of the equipment to ensure a secure connection, no damage or aging of the circuit. If any problems are found, the damaged components should be replaced immediately.
Regularly calibrate the digital display of the equipment to ensure the accuracy of the displayed values.
Every once in a while, it is recommended to conduct a comprehensive inspection and maintenance of the equipment. You can contact the equipment supplier or professional maintenance personnel for regular maintenance work.
After multiple operations, parts with friction may experience wear and need to be replaced in a timely manner.
Long term storage and maintenance
The equipment should be stored in a dry and ventilated place, and avoid direct sunlight.
When storing equipment, avoid stacking heavy objects or pressing them on the equipment.
For equipment that has not been used for a long time, protective measures such as dust covers should be taken to keep it in good condition.
Abnormal situation handling
If any abnormalities are found during use, such as noise, vibration, or high temperature, the use should be immediately stopped and the maintenance department should be contacted.
In summary, the safe operation and maintenance procedures of the digital brain stereotaxic device need to be strictly followed by operators to ensure the accuracy of the surgery and the safety of patients. At the same time, regular maintenance and upkeep of equipment are also key to ensuring its long-term stable operation.