The series electromagnetic diaphragm metering pump is an electromagnetic driven metering pump based on microprocessor control, which has the characteristics of simple operation and stable operation.

The AMS200 metering pump is the most cost-effective electromagnetic diaphragm metering pump.

Each metering pump is equipped with an installation bracket, injection valve, filter bottom valve, and inlet and outlet hoses.

	AMS200 Electromagnetic Metering Pump The flow rate can be manually adjusted through the adjustment knob on the control panel, and it also comes with a power indicator.
	AML200 electromagnetic diaphragm metering pump The flow rate can be manually adjusted through the adjustment knob on the control panel, with two flow ranges to choose from: 0-20% and 0-100% Equipped with a liquid level probe interface, it can be directly connected to a liquid level switch to control the start and stop of the metering pump.
	AMM200 self-control electromagnetic metering pump It can be manually adjusted or proportionally adjusted. The flow ratio can be adjusted based on external analog signals (4-20mA), with a power indicator light and liquid level probe interface, which can be directly connected to the liquid level probe to control the start or stop of the metering pump.
	AMC200 self-control diaphragm metering pump Proportional adjustment, which can adjust the proportion of flow based on digital signals (such as pulse signals from water meters), with power indication and liquid level probe interface, can directly connect to the liquid level probe to control the start or stop of the metering pump.

Metering pump injection valve	Bottom valve of metering pump	PE outlet pipe of metering pump	PVC inlet pipe for metering pump	Wall mounted installation bracket	Vertical installation bracket