Packaging and transportation vibration testerCompany News Center!
Highly praised by customers, * designed
Purpose:Packaging and transportation vibration testerSpecially testing the vibration resistance of finished products or components such as electronics, appliances, motors, household appliances, vehicles, aviation, communications, etc. To understand the effects and changes in the quality or structure of various equipment after being subjected to vibrations of a certain frequency and amplitude, simulated transportation vibration tests can be conducted on exported products.
Specifications
The maximum test load is 800kg
Frequency range 50~300rpm (adjustable)
Amplitude range 25.4 mm (1 inch)
Timer 1 second~99 hours 59 minutes 59 seconds
Vibration mode reciprocating (rotary)
Fence height 300mm
Workbench size 1500 × 1500mm
Dimensions (L × W × H) 1650 × 1650 × 700mm
Power supply 1 #, 380V, 4500W
Weight (approximately) 500kg
Packaging and transportation vibration testerPrecautions and Maintenance
1. Machine power supply identified as AC380V;
2. The power input and output lines are connected correctly and without errors;
3. This machine must be grounded (externally connected), and the power cord should be reliably grounded;
4. The item must be clamped tightly during testing;
5. Long term use without load is strictly prohibited, except for machine adjustment;
6. Do not operate beyond the specified load of the machine;
7. Please read the operating manual carefully and follow the safety precautions before using this machine;
8. No special requirements, it is strictly prohibited to change the setting program;
9. When the machine is working, it is strictly prohibited to open the chassis cover, otherwise serious electric shock and mechanical damage may occur;
10. Do not frequently turn on or off the machine during work. After turning on, please wait for 10 seconds for the machine program to self check;
11. After use, please turn off the main power supply;
12. During maintenance and inspection, tighten any loose screws and turn off the main power switch;
13. Keep the control box ventilated, dry, and clean.