1.Our company's inspection methods comply withISO 9001Quality system and standard requirements.
Our test methods are conform with Quality System and the standard of enterprise which confirmed by nation.
2.The data issued by our company can be traced back to national and metrological standards.
The data are based on the measurement standard of national and international.
3.This report is invalid without signature,Data alteration is invalid.
It well be ineffective without certification ,data alter will be ineffective ,too.
4.Customers are free to use this report,But it must be used in its entirety,No arbitrary excerpt allowed.The calibration result is only responsible for the condition of the instrument being calibrated at that time,Accuracy of calibrated instruments,It depends on the level of caution and frequency of use in the future.
Customer can use this report freely, but should used whole ,cannot extract willfully. Calibration result are only responsible for the condition of equipment at that moment. Precision of the equipment after calibrate of equipment after calibrate must according to frequency and carefulness degree of use.
5.The technical basis for this inspection:
Reference documents for the calibration:
ASTMD999TheISTA1A-2001TheEN71
6.The main measuring standard instruments used in this calibration:
Main measure equipment is used in the calibration:
utensil name/model serial number Certificate Number
Name of Equipment Serial No. Certificate No.
Laser displacement sensorXR01060633 LCL20100622
tachometerDPH33202 GDSB20100326
7.Inspection Site,environmental conditions:
Inspect place and Environment condition.
Finished Product Inspection Area |
location:temperature:relative humidity:
Place: Temperature: RH:
Simulated transportation vibration testing machineTechnical parameters:http://www.kshaida17.com/hgtc0808-Products-6849575/