Plastic bottle cap torque tester

Plastic bottle cap torque tester

There are many problems encountered when using bottled beverages, such as.The bottle cap is difficult to open，At present, the standards applicable to plastic bottle caps in China are《GB/T17876-2010The "Plastic Anti theft Bottle Cap for Packaging Containers" specifies the technical indicators and testing methods for the sealing performance and torque force of gas caps and non gas caps. As specified in the standard, the physical and mechanical properties related to bottle cap sealing and torque.

Among them, it is clearly stipulated that the opening torque performance: specification less than38mmThe torque force of the bottle cap should be0.6N.m-2.2N.mSpecification is less than38mmAnd the height is not greater than12mmThe torque force of the bottle cap should be0.4N.m-2.2N.m, specifications38mmThe torque force of the bottle cap should be0.6N.m-2.9N. mCan be applied to the stones in the Three SpringsNLY-20The bottle cap torque meter is used for testing. Before the experiment, the specified torque value is input into the instrument for setting. The bottle cap is clamped flat and twisted. When the instrument gives an alarm prompt, the specified torque value is reached. Commonly used torque force selection in the industry1.2N. m.

Jinan Sanquan Zhongshi Experimental Instrument ProductionNLY-20The bottle cap torque meter, while meeting national standards, also has the advantages of simple operation and accurate detection values, making it a necessary instrument for bottle cap torque detection.

Technical Specifications

measurement range 5Nm（10NmRange optional)

measurementerror 1level

divideResolution0.001Nm

clamping rangeΦ5mm～Φ170mm

data storage 1-80a

Overall dimensions 400mm×280mm×190mm(length, width, height)

heavyquantity8kg

Operating Temperature 15℃-50℃

relative humidity 80%,No condensation

working power supply 220V 50Hz

Plastic bottle cap torque tester