C630H Packaging Film Heat Sealing Tester Film Heat Sealing Tester

C630H Packaging Film Heat Sealing Tester Film Heat Sealing TesterIt can accurately and efficiently determine the appropriate performance parameters for heat sealing time, heat sealing pressure, and heat sealing temperature of plastic film substrates, flexible packaging composite films, coated paper, and other heat sealing composite films. The melting point, thermal stability, flowability, and thickness of heat sealing materials vary, resulting in different heat sealing performance, and the sealing process parameters may vary greatly.

Reference standard:

ASTM F2029、QB/T 2358、YBB 00122003

C630H Packaging Film Heat Sealing Tester Film Heat Sealing TesterTest application:

Basic application:

Smooth and flat film material - suitable for heat sealing tests of various plastic films, plastic composite films, paper plastic composite films, co extruded films, aluminum plated films, aluminum foil, aluminum foil composite films and other film like materials. The heat sealing surface is smooth and flat, and can be heat sealed at five temperatures simultaneously. The heat sealing width can be designed according to user needs.

Film Material Pattern Plane - Suitable for heat sealing tests of various plastic films, plastic composite films, paper plastic composite films, co extruded films, aluminum plated films, aluminum foil, aluminum foil composite films and other film like materials. It can simultaneously perform heat sealing at five temperatures, and the heat sealing surface can be designed according to user requirements.

Extended application:

Plastic hose - Place the tail of the plastic hose between the upper and lower heads, heat seal the tail, and turn the plastic hose into a packaging container.

C630H Packaging Film Heat Sealing Tester Film Heat Sealing TesterTechnical Specifications:

Heat sealing temperature: room temperature~300 ℃

Heat sealing pressure: 0.1MPa~0.7MPa

Pressure resolution: 0.001 MPa

Heat sealing time: 0.1-999.99s

Time resolution: 0.01s

Temperature resolution: 0.1 ℃

Temperature fluctuation: ± 0.2 ℃

Temperature accuracy: ± 0.5 ℃ (single point calibration)

Temperature gradient: ≤ 20 ℃

Air source: Air (provided by the user)

Gas source pressure: 0.7 MPa

Air source interface: 8mm polyurethane pipe

Hot cover: 40mm x 10mm

Number of heads: 5 sets (10 in total, each with independent temperature control)

Dimensions: 375mm (L) × 360mm (W) × 518mm (H)

Power supply: either 220VAC ± 10% 50Hz or 120VAC ± 10% 60Hz

Net weight: 55kg