SSG6M80ASeries RF/Microwave signal generator

SSG6M80Aseries

frequency range9 kHz-20 GHz

frequency resolution0.001 Hz

Maximum output power+25 dBm

Product Introduction

SSG6M80ASeries of multi-channel coherent microwave signal generators with frequency coverage ranging from9 kHzto20 GHzThe frequency resolution can reach0.001 HzThe phase noise measurement value is as low as-136 dBc/Hz（@1 GHz，10 kHzOffset), with core advantages such as multi-channel stable coherent, independent adjustable between channels, ultra-low phase noise, wide range output power, pure spectrum output, high stability and high output accuracy, supportingFM/PMThe functions of analog modulation, pulse modulation, pulse sequence generator, power meter control, phase memory, etc. can be widely adapted to complex scenarios such as communication system testing, satellite communication verification, and multi antenna system development, providing industry users with more efficient and reliable microwave signal generation solutions.

Key Features

Supremefrequency13.6 GHz/20 GHz

lThe output frequency resolution can reach0.001 Hz

lPhase noise<-136 dBc/ Hz@1 GHz, offset10 kHz(Measurement value)

lSupports analog modulation and pulse modulation functions (optional), pulse train generator, and user customizable pulse sequence (optional)

lChannel frequency, amplitude, and phase can be independently adjusted, supporting single device channel synchronization and multi device channel phase synchronization, with phase memory function

lCoherent mode, carrier frequency=10 GHzChanges in environmental temperature±2℃Observation time5Hour, phase fluctuation<1.5°

lRich communication interfaces: standard configurationUSB-HOST，USB DEVICE（USB-TMC），LAN（VXI-11,Socket,Telnet）,optionalGPIB

Product advantages

lMulti channel stable coherence for precise synchronization of complex systems

Traditional single channel signal sources often face problems such as difficulty in inter channel synchronization, phase inconsistency, and complex timing control when dealing with complex testing scenarios. The multi-channel coherent microwave signal generator launched by Dingyang Technology this timeSSG6M80ASeries, capable of stable output of multi-channel coherent signals for single or multiple devices, with independently adjustable frequency, phase, amplitude, and delay between channels, supporting relative phase difference adjustment of multi-channel signals.

SSG6M80ACan be maintained10The phase drift value between channels under full bandwidth within an hour is less than±1.5°The change in ambient temperature is less than±2℃）Ensure phase stability during long-term testing. In addition,SSG6M80AIt also has phase memory function, supporting quick recovery of the original phase state after frequency switching, helping to improve testing efficiency.

lUltra low phase noise, providing high-purity spectrum output

SSG6M80AOutstanding performance in phase noise:1 GHzCarrier wave10 kHzAt the offset, the measured value of phase noise is lower than-136 dBc/HzThis ultra-low phase noise characteristic can effectively reduce the impact of the signal source's own noise on the testing system when testing high-sensitivity receivers, thereby accurately evaluating the true performance of the system.

In addition to excellent phase noise,SSG6M80AIt also performs well in terms of spurious and harmonic suppression. High purity spectrum output enablesSSG6M80AIt can adapt well to application scenarios that require high signal quality, such as local oscillator replacement, interference simulation, and high linearity system testing. Even under extreme testing conditions, it can maintain stable spectral purity, providing reliable signal quality assurance for complex components, modules, and system testing.

lHigher output power, balancing wide range and high precision

In terms of output level,SSG6M80AHas excellent power output performance and supports from-110 dBmto+25 dBmIt has a wide range of output and can maintain high output power across the entire frequency range.

In terms of amplitude accuracy,SSG6M80ABetter than under typical conditions0.7 dBCombined with the power meter control kit, users can easily achieve power calibration and line loss compensation, significantly improving the power accuracy and repeatability of the testing system, and providing reliable power guarantee for multi port and large dynamic range testing scenarios.

lFlexible modulation capability to meet the requirements of complex waveform generation

SSG6M80AsupportFMThePMSimulate modulation, pulse modulation (optional), pulse train generator, and user-defined pulse sequence (optional), and can achieve the combination of multiple modulation methods.

SSG6M80AIt also provides two modes of step scanning and list scanning, supporting linear scanning/Logarithmic stepping, triangulation/Sawtooth waveform, scanning point count can reach up to65535Point to meet the requirements of complex signal simulation and automated testing.

lComplete interface configuration, supporting system integration and automated testing

SSG6M80AConfigure high-performanceOCXOReference source ensures high stability and output accuracy of the signal. In addition, the instrument has a complete interface configuration and supportsUSBTheLANTheGPIBMultiple remote control methods such as (optional), compatible with mainstreamSCPICommands can be easily integrated into various automated testing systems.

Product Parameters

Product Model