Characteristics of hydrogen gas generator for chromatography:

1. Small size, light weight, can replace high-pressure steel cylinders, eliminates the labor of handling, and makes the laboratory instrument more efficient.

2. The hydrogen generator for chromatography is easy to operate and has a high degree of automation. Activate the switch to produce gas; Just add distilled water for regular use.

3. If the liquid level is lower than the set value, an automatic sound and light alarm will be triggered to remind customers to add liquid. At this time, the generator does not stop working. When the liquid level is below the extreme *, the gas production will automatically stop to prevent the machine from burning out.

4. The pneumatic system is equipped with overvoltage protection and anti alkali return devices, which are safe and reliable.

5. Stable traffic, LED digital display, automatic tracking, intuitive and convenient.

6. Long service life, continuous operation, stable flow rate, and purity without degradation.

7. We promise a one-year warranty for the entire machine.

The use of hydrogen generators for chromatography:

1. Remove the sealing nut of the gas outlet on the back of the hydrogen generator (please keep it safe for future self inspection of the instrument). Connect the hydrogen generator outlet that has passed self inspection to the hydrogen inlet of the chromatograph using a gas pipeline with an outer diameter of Φ 3, tighten the nut, and ensure good sealing. Turn on the power switch and the instrument enters the working state.

2. When using the instrument, attention should be paid to whether the flow display is consistent with the gas consumption of the chromatograph. If the flow display exceeds the actual usage of the chromatograph by a large amount, the machine should be stopped for leak detection.

3Hydrogen Generator for ChromatographyEquipped with a filter and color changing silicone gel. During use, check whether the silicone in the filter changes color through the observation window. If it changes color, please replace or regenerate it immediately. Method: Unscrew the filter, unscrew the filter cover, replace the silicone, tighten the filter cover, install the filter on the base and tighten it, and check for air leakage.

4. After using the instrument for a period of time, the electrolyte will gradually decrease. When the electrolyte level approaches the lower limit, it should be replenished in time. At this time, only secondary distilled water or deionized water needs to be added, and the liquid level should not exceed the upper limit water line.

5. Do not operate the instrument without load for a long time when the pressure is "0". When running without load, it will burn out the electrolytic cell and switch power supply components. Causing damage to the entire instrument.

6. Users should not disassemble or open the electrolytic cell by themselves (as they cannot repair it themselves) to avoid affecting the overall operation of the machine.

7. If the hydrogen generator for chromatography needs to be transported, please clean the electrolyte in the reserve liquid tank with an ear wash ball. Attention: The electrolytic cell of this instrument is barrel shaped, and there is a considerable amount of electrolyte stored in the electrolytic cell. Therefore, after suctioning off the electrolyte in the storage tank, the instrument needs to be tilted forward 90 degrees. At this time, the electrolyte in the electrolytic cell will flow into the storage tank, and then use an ear wash ball to suck up the electrolyte in the storage tank. Then install the inner cover and screw on the outer cover to prevent residual electrolyte from overflowing during transportation, which could corrode the entire instrument and cause irreparable consequences.

　　Hydrogen Generator for ChromatographyIt consists of electrolytic cell, pure water tank, hydrogen/water separator, collector, dryer, sensor, pressure regulating valve, switch power supply and other components. Only electrolyzing pure water can produce hydrogen.