MaFu Furnace 708P Artificial Intelligence Temperature Control Operation Instructions

Introduction to 708P Artificial Intelligence Industrial Regulator

1. Main features:

(1) The AI artificial intelligence adjustment algorithm used has no overshoot, self-tuning function, and can achieve temperature control of any slope. It has programmable/operable commands such as jump (loop), run, pause, and stop.

(2) The input and output adopt a digital calibration system, which ensures stable measurement and can be extended to use nonlinear sensors with any scale.

(3) The second-order digital filtering function and watchdog circuit can maintain accurate measurement and stable operation even in strong interference environments.

(4) Measurement degree: 0.2

(5) Alarm function: upper limit, input open circuit.

(6) Automatic/manual disturbance free switching, 30 segment program control function.

(7) Power failure protection: Due to the use of EPROM chips, various input data can be reliably saved even when the instrument is powered off or disturbed.

(8) Power supply: 85-264VAC 50-60Hz

(9) Power consumption: ≤ 5W

OphidaThe operating instructions for the atmosphere furnace are applicable to diffusion welding of metals, nanomaterials, monocrystalline silicon, polycrystalline silicon, batteries, etc. The heating equipment for atmosphere heat treatment is used in material or chemical laboratories to sinter various new material samples in an atmosphere state.

The box type atmosphere furnace uses silicon carbon rods as heating elements, adopts a double-layer shell structure and a program-controlled temperature control system, with phase-shifting triggering and controllable silicon control. The furnace is made of alumina polycrystalline fiber material, and there is an air cooling system between the double-layer furnace shells, which can quickly raise and lower the temperature. The shell is sealed as a whole, and the cover plate is sealed with silicone mud. The furnace door is sealed with silicone pads and connected to a water cooling system. The gas enters and exits the rear chamber after passing through the flow meter. There are multiple furnace inlet and outlet ports with combustion nozzles, which can supply gases such as water vapor, argon gas, nitrogen gas, oxygen gas, oxidized carbon, ammonia decomposition gas, etc

Box type atmosphere electric furnace uses high-quality resistance wireSilicon carbon rod, silicon molybdenum rodAs a heating element, the blast furnace temperature can reach 1800 ℃. It can prepare a 30 segment heating curve for automatic operation and good temperature tracking. This electric furnace is widely used in the research of metal materials, ceramics, glass, etc