Solman portable smoke analyzer air tightness test

Today, I will explain to you the testing of the airtightness of the flue gas analyzer. Firstly, it is necessary to prepare the smoke analyzer host, cables, and cable plugs. Next, we will enter the topic and open the smoke analyzer to enter the main page. Find the three-day horizontal line in the upper right corner, click on other measurement functions, and find the air pump flow rate. The current value is 0.45. We will first test the airtightness of the host and block the smoke inlet below the smoke analyzer with our fingers. At this time, the air pump flow rate value will drop to 0.00. Releasing it will restore the original value, which is a test of the airtightness of our flue gas analyzer host and also proves that the airtightness of this flue gas analyzer is very good. Next, let's test the airtightness of the entire cable. First, seal the probe detection port with a cable plug. Then, connect the cable plug to the main unit of the smoke analyzer. At this time, observe the measurement data of the gas pump of the smoke analyzer. As the data gradually decreases, the airtightness value of the measured cable finally drops to 0.00, proving that the airtightness of our cable is also very good. This smoke analyzer model is SICA130, imported from Solman, France. It is lightweight, portable, sturdy and durable, with intelligent touch display function and equipped with computer data management software and smartphone applications for more in-depth combustion efficiency analysis. The intelligent gas sensor can be replaced on site to further improve measurement performance. To further understand, click on the link below to consult immediately.