Product Manual for Building Sealing Material Density Tester

1、 Product Introduction

The TDMF-BG type dry time tester for building sealing materials is professionally customized by Hebei Tianqi Xingzi Testing Equipment Co., Ltd. according to the density test requirements of sealing materials in GBT13477-1992 "Test Methods for Building Sealing Materials".

2、 Technical parameters

1. Metal ring: made of brass or stainless steel, with a height of 12mm, an inner diameter of 65mm, and a thickness of about 2mm. The upper and lower surfaces should be flat and smooth, and well sealed with the upper and lower plates.

2. The upper and lower plates are made of glass panels. There is a V-shaped notch on the upper plate, with a thickness of 2mm for the upper plate and 3mm for the lower plate, both measuring 85mm x 5mm. The surface is flat and well sealed with the metal ring.

3. Other instruments (self provided)

3.1 burette: capacity 50mL. 3.2 Balance: weigh 50mL, sensitivity 0.19.