The fully automatic viscosity measuring instrument is a high-precision instrument widely used in industries such as chemical, pharmaceutical, food, coatings, and paints to measure the viscosity of liquids. Its automated design makes the operation process simpler and more efficient. The following is the operation process of the fully automatic viscosity measuring instrument:

1、 Instrument preparation and installation

Check the instrument: Before use, check the various components of the viscosity meter to ensure that the display is normal and there is no looseness or damage.

Connect power and water source: Ensure that the instrument is connected to the power source and connect to the cooling water source as needed.

Choose the appropriate rotor or probe: Select the appropriate rotor or probe based on the viscosity range of the liquid.

2、 Sample preparation

Cleaning containers and samples: Before testing, ensure that the containers and samples are clean and free from contamination.

Temperature control: Viscosity is closely related to temperature, ensuring that the temperature of the sample is consistent with the testing temperature set by the instrument.

3、 Set operation parameters

Select measurement mode: Select the corresponding measurement mode according to the testing requirements.

Set speed: Set the appropriate speed based on the viscosity of the liquid.

Choose measurement time: Set an appropriate measurement time based on the properties of the sample.

4、 Start testing

Start the instrument: Start the fully automatic viscosity measuring instrument, and the instrument will start rotating the probe or rotor and automatically read the viscosity of the sample.

Automatic measurement and recording: During the measurement process, the instrument will automatically record data and display real-time viscosity values.

5、 Test completion and data analysis

Read result: After the test is completed, read the viscosity value on the display screen.

Data saving and printing: As needed, save the test data to the internal memory of the instrument or export it directly to the computer for further analysis.

6、 Cleaning and maintenance

Cleaning the sample pool and rotor: After each test, it is necessary to clean the sample pool and measuring rotor to avoid residue affecting the next test.

Regular calibration: To ensure measurement accuracy, it is recommended to calibrate the instrument regularly.

Through the above steps, the fully automatic viscosity measuring instrument can efficiently and accurately measure the viscosity of liquids, providing strong support for quality control and research and development work in related industries.