Welcome Customer !

Membership

Help

Hangzhou Qikun Technology Co., Ltd
Custom manufacturer

Main Products:

instrumentb2b>News

Hangzhou Qikun Technology Co., Ltd

  • E-mail

    qikun@hzqikun.com

  • Phone

    13858055033

  • Address

    No. 2 Houxi Road, Fengchuan Street, Tonglu, Hangzhou City, Zhejiang Province

Contact Now
Qikun Technology participated in the 12th National Drug Quality and Safety Conference, with a brand new product unveiled and received a warm response
Date: 2022-08-16Read: 0



图片


Qikun Technology

participate

The 12th National Conference on Drug Quality and Safety

图片
图片
图片





Conference Introduction

news

On August 12-13, the "12th National Drug Quality and Safety Conference 2022" was successfully held under the guidance of the Food and Drug Industry Development and Supervision Research Center of the Chinese Academy of Social Sciences, jointly organized by the Beijing Zhongpei Science Inspection Information Technology Center and the Drug Safety Association Learning Platform! This conference also set up sub venues around six themes: drug safety, compliance and quality management, production management and process technology, regulatory technology and technology management, quality analysis, laboratory management, biopharmaceutical research and development and quality control, sterile assurance and quality control. Experts and scholars from various industries were invited to share their experiences and reports, attracting more than 1000 industry experts, quality control and inspection technicians from biopharmaceutical companies, drug inspection institutions and other units across the country to participate in this conference, setting a new record in history!

图片
图片
图片






图片

Qikun Technology Product Display

At the conference, Qikun showcased several series of products, including sterile takeover machines, sterile sealing machines, micro leak non-destructive sealing testers, and total organic carbon (TOC) analyzers, which attracted the attention of many customers and industry experts on site.






图片

The on-site response was enthusiastic

Product Introduction

news

The slow flowing water sample is oxidized using ultraviolet (UV) radiation, and the organic matter in the sample is oxidized to CO2. The measurement of CO2 is carried out using conductivity detection technology, and the total organic carbon value of the water sample is obtained by measuring the change in conductivity of the water sample before and after oxidation.



图片

CU-600GS


Adopting dual ultraviolet lamps and conductivity detection;

Adopting an eleven inch display screen, touch screen operation is more time-saving and labor-saving;

No need for carrier gas and reagents, simple maintenance, low cost;

Large data storage capacity, easy to query, and can be queried by day and printed by batch number



图片


CU-600HS


The CW series total organic carbon analyzer adopts the principle of UV+persulfate oxidation NDIR detection, which can detect water samples with TOC concentrations ranging from 0.001 mg/L to 100.0 mg/L. It has high sensitivity, accuracy, and good stability.



图片


CW-700S


Qikun Weldrl is a fully automated device used for aseptic welding of thermoplastic pipes.

This fully automatic device can aseptically connect thermoplastic tubes with an outer diameter of 1/4 to 3/4 inch.

Used to connect thermoplastic tubes on disposable bags used in biopharmaceutical processes, such as C-flex and Advanta flex. Can connect individual bags or bag components in non sterile environments and maintain the sterility of the product.



图片


Aseptic takeover machine


Qikun Sealell is a fully automatic device used for leak free sealing of thermoplastic pipes.

Qikun Sealer II is used to disconnect thermoplastic tubes on disposable bags used in biopharmaceutical processes, such as C-flex ®、 Advantaflex ®、 FluiSoft ®、 SanipureTMPharmed ®。 Individual bags or bag components can be disconnected in non sterile environments while maintaining the sterility of the product.



图片


Aseptic sealing machine


The CU-600B micro leak non-destructive sealing tester was developed based on the standard "ASTM F2338-2013 Standard Test Method for Packaging Leakage - Vacuum Attenuation Method". Professional application for non-destructive positive and negative pressure micro leak testing of various empty/pre filled syringes, water and powder injection bottles (glass/plastic), filling and capping bottles, milk powder cans, other hard packaging containers, electrical components and other samples. This product adopts advanced design and rigorous, scientific calculation methods to ensure its fast testing, high accuracy, and high stability. It can also meet users' non-standard (software or testing fixture) customization needs.



图片


CU-600B


Qikun Technology will continue to strive to provide you with better products and professional services! Let's create a better future together!