PNTOO has multiple types of strobe lights ranging from small power 4W to large power 750W, which can meet the detection needs of different fields in the metal processing industry. From hot rolling lines to rewinding lines, from hazardous areas to areas that are difficult for general inspection tools to reach, PNTOO can provide suitable models to meet customer needs.

PNTOO strobe lights can ensure that inspectors can clearly see product defects, and many manufacturers insist on installing PNTOO strobe lights on their production lines before starting production. While the production line is running at full speed, many product defects, such as curling, protrusion, roller printing, scaling, edge cracks, printing, abrasion, dirt, adhesion, delamination, scratches, and shape problems, can be immediately detected by inspectors with only visual inspection. After using the PNTOO strobe detection lamp, the inspectors do not need to conduct offline inspections or uncoiling inspections, but can discover surface quality problems of the product within a certain period of time during the production process.

In some high-speed processes, the detection light system may be damaged. In such areas, we strongly recommend installing the PN-117A series strobe detection light system. This model of product is particularly suitable for installation in the production processes of this series of products, including hot rolling mill, cold rolling mill, continuous rolling mill, tempering, and leveling.

PN-03E stroboscope

PN-08C Strobe

PN-117A Strobe