Fully automatic hammer type cyclone millIt is a specialized equipment used for sample crushing in the grain, feed, and food industries. It can quickly crush samples of grains, feed, Chinese medicinal materials, etc. to 80-200 mesh without sample loss. It is widely used in laboratory sample pretreatment, quality testing, and other processes, providing uniform samples for subsequent component analysis (such as protein and starch detection).
Its working principle is based on the collaborative mechanism of "impact crushing+cyclone separation": the high-speed rotating hammer in the crushing chamber is driven by the motor (with a speed of up to 10000r/min), and the hammer produces strong impact and shear effects on the sample, crushing it; At the same time, the device is equipped with a built-in cyclone separation system, which sucks the crushed fine particles into the collection bag through negative pressure airflow, while the coarse particles remain in the crushing chamber for further crushing, achieving fully automatic completion of "crushing separation collection" without manual intervention, and the sample is free of cross contamination (the crushing chamber can be quickly disassembled and cleaned).
In terms of structural design,Fully automatic hammer type cyclone millFocus on "efficiency+no loss". The crushing chamber is made of stainless steel material, which is wear-resistant and easy to clean; The feeding port is equipped with an automatic feeding device to control the feeding speed and avoid overload; The collection bag is made of breathable non-woven fabric material, which facilitates the collection of fine particles and prevents dust leakage; The equipment is equipped with overload protection function, which automatically shuts down when the motor is overloaded to protect the equipment. High crushing efficiency, processing 50g wheat samples takes only 30 seconds, and the sample recovery rate is ≥ 99%.
In the application scenario, the key to its sample preparation capability is: in the field of grain detection, it is used for crushing grain samples to detect moisture, ash content, and protein content; Used in the feed industry for pre-treatment of feed samples, analyzing whether the nutritional components meet the standards; Used in the processing of traditional Chinese medicinal materials for grinding and preparing for the extraction of active ingredients. Attention should be paid to operation and maintenance: impurities (such as stones and metal blocks) should be removed from the sample to prevent damage to the hammer blade; Clean the crushing chamber and collection bag in a timely manner after crushing to avoid sample residue; Regularly check the wear of the hammer blade and replace it if it is severely worn; Lubricate the bearings every 3 months to ensure smooth operation.