1、 Power failure

If the hammer type cyclone mill does not have enough power to complete the task, there may be a situation where it fails to start and rotate. Check if the power supply is connected properly, if there is power, or if the power cord is broken. If it is a power issue, you can replace the power cord or plug, or check if the connection circuit is correct.

2、 Mechanical malfunction

When the hammer type cyclone mill is blocked or has other mechanical failures, it may not be able to start and rotate. Check if the grinding head is damaged or stuck, and if there are any foreign objects blocking the middle of the grinding head. It needs to be cleaned thoroughly. If the grinding head is found to be damaged during the cleaning process, it needs to be replaced.

3、 Motor issues

If the motor of the hammer type cyclone mill malfunctions, it may result in a situation where it cannot start and rotate. Motor problems are mainly caused by wear or aging, which can result in the motor not functioning properly. In this case, it is necessary to replace or repair the motor. At the same time, it is necessary to check whether the wires of the motor and other parts are reliable.

Based on the above points, when the hammer type cyclone mill does not rotate during startup, it is necessary to first check whether the power supply is normal, then check whether the grinding head is blocked or damaged, and finally check whether the motor has any problems. If none of the above methods can solve the problem, it is recommended to go to a professional repair shop for inspection and maintenance.

This article introduces the possible reasons for the non rotation of the hammer type cyclone mill during start-up and corresponding solutions, hoping to help users quickly identify and solve the problem. At the same time, safety should be taken into account when using electric tools, and parts should not be disassembled or replaced at will to avoid accidents.