The usage method of the circular powder sieve mainly includes the following steps:
1、 Preparation work:
Check the equipment status: Ensure that all components of the circular powder sieve are intact, the screen mesh is not damaged, and the vibration device is working properly.
Choose the appropriate sieve: Select a sieve with the appropriate aperture according to the particle size requirements of the material. Different mesh sizes can affect the screening effect.
Cleaning materials: Ensure that the materials are not bonded into blocks. Materials that are too damp or contain excessive impurities should be pre treated.
2、 Install screen mesh:
Place the sieve in the sieve frame, ensuring it is flat, wrinkle free, and securely fixed at both ends to prevent the sieve from loosening or shifting during the screening process.
3、 Put in materials:
Place the material to be screened evenly on the surface of the sieve. Be careful not to put too much material at once to avoid affecting the screening effect due to excessive material.
4、 Set vibration mode:
If it is a circular powder sieve with electric vibration, adjust the frequency and amplitude of the vibration to ensure uniform and appropriate vibration. Excessive vibration may cause particle damage, while insufficient vibration may affect the screening effect.
5、 Start screening:
Start the device, and the circular powder sieve will automatically complete the screening process within a certain period of time. The screening time is determined based on the particle size of the material and the required screening accuracy.
6、 Collect screened materials:
After screening, collect and store the screened materials.
7、 Cleaning equipment:
Clean the equipment after use to ensure its normal operation and extend its lifespan.
8、 Attention:
1. During use, attention should be paid to the humidity and adhesion of the materials, and pre-treatment should be carried out if necessary.
2. During operation, ensure that the equipment is in good condition to avoid affecting the screening effect due to equipment problems.
3. The usage method of different models of circular powder sieves may vary, and specific operations should refer to the equipment manual.
By following the above steps and precautions, it is possible to effectively use a circular powder sieve for material screening, ensuring the screening effect and safe operation of the equipment.