‌‌Experimental rice millOperation methods and common problem handling:

1preparation

1、‌Sample preparation‌Use a huller to husk rice and prepare brown rice samples. The selected brown rice samples should not contain hard substances such as stones or glass to avoid damaging the grinding disc and grinding chamber. The quality of the test sample should be selected as the optimal grinding amount specified by this equipment to achieve the best grinding effect.

2、‌Power connection‌Place the rice mill on a horizontal workbench, then connect one end of the power cord to the equipment power socket and the other end to the laboratory power socket.

3、‌Equipment inspection‌Slide the upper cover switch to the left with your left hand, and gently hold the upper cover with your right hand to open it smoothly. After opening the lid, observe whether there are samples or other residues left on the polished rice collection box and grinding disc. If there are, remove them in a timely manner.

4、‌power check‌: Press“power switch”Button, check if the device is powered on. As normal, time display“00”The green indicator light above the button is on and flashing. If it doesn't light up, please check if the main power switch is connected or if the fuse is functioning properly.

IIOperation steps

1、‌Grinding time setting‌Set the grinding time according to the different types of samples. For example, the setting of japonica rice35Second, indica rice setting40Seconds, high-quality rice (long grain type) setting45In seconds. After setting the time, press“start/pause”The button device starts grinding work.

2、‌Grinding operation‌After setting the time, press“start/pause”The button device starts grinding work. During the grinding process, the countdown time decreases every second, and the bran powder produced by grinding automatically enters the bran powder collection box through the suction fan and air duct.

IIIPrecautions

‌security check‌Before operation, check for any safety hazards around to ensure the safety of the equipment.

‌sample quality‌The selected brown rice sample should not contain any hard substances to avoid damaging the equipment.

‌power check‌Ensure that the power connection is correct and the device is powered on normally.

‌Operating Specifications‌Follow the operating procedures to avoid equipment damage caused by misoperation.

4Common problem handling

‌Equipment failure‌If the equipment malfunctions, it should be immediately stopped and professional personnel should be contacted for repair.

‌sample problem‌If there are hard substances in the sample that cause equipment damage, it should be cleaned and replaced with qualified samples in a timely manner.

‌Improper operation‌If improper operation leads to settingIf the equipment is damaged, it should be operated again according to the operating procedures.