The fully automatic nitrogen blower has multiple fixed volume modes to choose from:
Fixed volume mode, timed mode, fixed volume timed mode. Customers can set their own concentration according to different needs, without the need for supervision. The concentration is automatically completed according to the customer's pre-set instructions, providing work efficiency

1. The power supply must be grounded.
2. The nitrogen blower should be used in a fume hood to ensure good ventilation.
3. Do not use nitrogen blowers for substances with ignition points below 100 ℃.
4. When using a nitrogen blower, hands and eyes should be protected.
5. Do not move the nitrogen blower during heating to prevent burns.
6. Do not open the water bath casing with electricity to prevent electric shock.
7. Do not use acidic or alkaline substances, otherwise it will damage the nitrogen blower.
8. After the instrument is installed, the safety fixing screws must not be removed under any circumstances.
9. When adjusting the temperature, please do not press and hold the temperature control button, otherwise the temperature control will be pressed randomly.
10. To prevent cross contamination, the air needle tube should be cleaned promptly after each use, and care should be taken not to let water enter the interior of the chassis.