Isothermal amplification fluorescence detectorIt can be used for real-time detection in pastures, forest farms, livestock farms, and water sources, for rapid diagnosis of disaster and epidemic prevention and control, inspection and quarantine in the field of food safety, and scientific research in biological laboratories.
The front soft shutdown button can prevent occasional file or data loss issues caused by hard shutdown.
7-inch capacitive touch screen, Win10 operating system, easy to operate, easy to get started with experiments.
Dual channel and dual module design, allowing for free experimentation and independent operation of two different programs.
Using the same collection light path to improve repeatability.
It has protection functions such as overcurrent, overtemperature, and power failure data self recovery to ensure the safe operation of the experiment.
It can support lithium battery power supply, especially suitable for fast inspection and field testing.
Daily maintenance points:
Storage environment:
When stored for a long time, the battery should be charged to 50% and checked regularly to avoid humid or extreme temperature environments (recommended humidity<60%, temperature 18-25 ℃).
The instrument should be kept away from water sources, heat sources, and strong magnetic fields, and well ventilated.
Cleaning operation:
Surface cleaning: Use a soft cloth dipped in water or 70% alcohol to wipe, avoiding direct spraying of cleaning agents.
Reaction hole maintenance: Use a balloon to remove dust every 3 months. If the reagent leaks, use a dust-free cloth dipped in alcohol to clean.
Optical components: Regularly inspect the fluorescence detection window to avoid fingerprints or stains affecting the signal.
Usage habits:
Avoid frequent power on/off (with an interval of ≥ 30 seconds), and wait for the module to cool to room temperature before shutting down after the experiment is completed.
When not in use for a long time, perform a 20 minute power on self-test every two weeks.