The customer successfully accepted the constant temperature and humidity test chamber and the cold and hot shock test chamber-Guangdong Kebao Experimental Equipment Co., Ltd

About Us

Certificates

Guangdong Kebao Experimental Equipment Co., Ltd

E-mail
3068879847@qq.com
Phone
13732586353
Address
No.15 Shihuan Road, Dongcheng District, Dongguan City, Guangdong Province

The customer successfully accepted the constant temperature and humidity test chamber and the cold and hot shock test chamber

Date: 2022-04-12Read: 0

The customer successfully accepted the constant temperature and humidity test chamber and the cold and hot shock test chamber

In April 2022, the Guangdong customer successfully accepted one cold and hot shock test chamber and three constant temperature and humidity test chambers that we sent. Thank you for the customer's trust and support.

Technical parameters of cold and hot shock test chamber:

Temperature shock range	High temperature range of 60 ℃ to+150 ℃ Low temperature -55 ℃~-10 ℃
Preheating temperature range	＋60℃ ～＋180℃
Heating time of high temperature tank	RT (room temperature)~+180 ℃ ≤ 35 minutes (at room temperature of+10~+30 ℃)
Pre cooling temperature range	－10℃～－65℃
Cooling time of low-temperature tank	RT (room temperature)~-65 ℃ ≤ 50min (at+10-+30 ℃)
temperature fluctuation	±1.0℃
Temperature Uniformity	±2.0℃
Impact recovery time	－55-- ＋150℃≤5min.

Technical parameters of constant temperature and humidity test chamber

model		KB-TH-S-80		KB-TH-S-150	KB-TH-S-225	KB-TH-S-408	KB-TH-S-800	KB-TH-S-1000
Inner box size WxHx4mm		400x500x400		500x600x500	500x750x600	600x850x800	1000x1000x800	1000x1000x1000
Outer box size WxHx4mm		900x1450x1000		1000x1500x1000	1100x1600x1100	1200x1700x1300	1500x1850x1400	1500x1850x1520
sex can	temperature range		G: -20℃— +100℃（150℃） Z: -40℃— +100℃（150℃） D: -70℃— +100℃（150℃）
	humidity range		20%-98%R.H/30%-98%R.H
	Temperature and humidity analysis accuracy/uniformity		±0.01℃; ±0.1%R.H/±1.0℃; ±3.0%R.H
	Temperature and humidity control accuracy/fluctuation		±0.01℃; ±2.0%R.H/±0.5℃; ±2.0%R.H
	warm-up time		-20 ℃ -+100 ℃ for about 35 minutes; -40 ℃ -+100 ℃ for about 45 minutes; -70 ℃ -+100 ℃ for about 60 minutes
	Cooling time		+20 ℃ -20 ℃ for about 45 minutes; +20 ℃ -40 ℃ for about 60 minutes; +20 ℃ -70 ℃ for about 90 minutes
material	Inner box material		SUS 304 # stainless steel
	outer box material		Cold rolled steel plate painted with paint or stainless steel plate
	Insulation material		Hard foam+glass wool (when the high temperature is 150 ° C)Using glass wool at ℃）