-
E-mail
3068879847@qq.com
-
Phone
13732586353
-
Address
No.15 Shihuan Road, Dongcheng District, Dongguan City, Guangdong Province
Guangdong Kebao Experimental Equipment Co., Ltd
3068879847@qq.com
13732586353
No.15 Shihuan Road, Dongcheng District, Dongguan City, Guangdong Province
Hubei customer satisfaction acceptance of composite salt spray test chamber
In April 2022, the Hubei customer's composite salt spray test box was satisfactorily accepted. We are very grateful for the customer's positive feedback on our equipment.
Product Introduction
Composite salt spray corrosion test chamberIt is aimed at surface treatment of various materials, including coatings, electroplating, inorganic and organic films, anodizing, anti rust oil and other anti-corrosion treatments, to test the corrosion resistance of their products.
Control method
1.KB-Y-60Composite salt spray corrosion test chamberThe Bernoulli principle is used to extract salt water and then atomize it uniformly, which can prevent crystallization and ensure the standard of continuous testing.
2. Nozzle: made of special glass nozzle, which can adjust the size of spray volume and spray angle.
3. spray volume: spray tower is set in the middle of the laboratory to make the fog fall evenly, and can be adjusted to 1~2 ml 80 cm 2/hr (16 hour average volume)
Technical Specifications
studio dimensions |
600×400×450 mm （L×W×H） |
Analysis accuracy |
± 0.1℃ |
control accuracy |
± 1.0℃ |
Distribution accuracy |
± 2.0℃ |
Test Method |
1. Salt water spray test: NSS, ACSS (1) Laboratory: 35 ℃± 1 ℃ (2) Saturated air tank: 47 ℃± 1 ℃ 2. Acetate salt spray test: NSS, ACSS (1) Laboratory: 50 ℃± 1 ℃ (2) Saturated air tank: 63 ℃± 1 ℃ Add acetic acid with ice to adjust the pH value of the test solution to 3.1~3.3 3. Copper speed test: CASS (1) Laboratory: 58 ℃± 1 ℃ (2) Saturated air tank: 65 ℃± 1 ℃ Add acetic acid with ice to adjust the pH value of the test solution to 3.1~3.3, and mix with 0.02~0.025% copper chloride |
product structure
laboratory |
Using P.V.C polyvinyl chloride board with a thickness of 5mm and a temperature resistance of up to 80 ℃ |
sealing cover |
Using acrylic impact resistant board with a thickness of 6mm and a transparent sealing cover, the condition of the tested product can be observed in real time |
pressure tank |
Adopting SUS # 304 stainless steel high-pressure resistant barrel, with excellent insulation effect |
heating system |
Using imported stainless steel finned heat pipe U-Type electric heater to heat the air |
shelf |
Using a planar indexing frame, the angle can be adjusted arbitrarily, and the four sides are consistent in terms of falling and receiving fog, with a large number of test pieces placed. |
Control Panel |
◆ Laboratory temperature controller 0-99.9 ℃, LCD digital display with PID automatic calculation, control error ± 0.3 ℃ Saturated air tank temperature controller 0-99.9 ℃, LCD digital display with PID automatic calculation, control error ± 0.3 ℃ ◆ Heating tank liquid expansion safety temperature controller 0-120 ℃ ◆ Saturated air tank liquid expansion safety temperature controller 0-120 ℃ ◆ Digital display time controller 0.1s-9990hr Accumulator 0-9990hr ◆ Rocker illuminated buckle switch, capable of continuous buckle locking 20000 times |