Thank you to Xi'an Lichuang Material Testing Technology Co., Ltd. for their strong support to our company

Buddha said, 'Looking back five hundred times in the past life, we have missed each other once in this life; passing by five hundred times in the past life, we have met each other once in this life.' So, how much fate did our successful cooperation come from in the past life? This cooperation is really not easy because Xi'an Lichuang needs equipment for non elevation low-temperature testing machines. There are many technical issues involved in the communication process, and many details need to be communicated bit by bit. Our technicians are very patient and actively communicate with customers no matter how many problems there are. In the end, this cooperation was finalized in just one week. Of course, we are very grateful for Xi'an Lichuang's strong support and trust in our company. The specific parameters of the non elevation low-temperature test chamber are as follows:

Product Name: Programmable High and Low Temperature Test Chamber (Customized Type)

Product model: AP-GD-107C3

Internal volume: 107L

Inner box size: 320 * 550 * 650mm (W * H * D)

External dimensions (approximately): The dimensions of the product area's outer box are 420 wide, 700 high, and 1725 deep. The total external dimensions of the entire machine are 800 wide, 1750 high, and 1725 deep (note: when the door is opened 90 degrees, the total width of the environmental box (including the door) is less than 525mm)

Weight: Approximately 200kg

Temperature range: -40 ℃ to+80 ℃ (air-cooled)

Cooling rate: RT~-40 ℃/70min (unloaded) about 1 ℃/min

Heating rate: RT~+80 ℃/17min (unloaded) about 3 ℃/min

Temperature stability: ± 0.5 ℃

Temperature analysis accuracy: 0.01 ℃

Temperature uniformity: ± 2.0 ℃

Work noise: A sound level ≤ 75dB (A)

Material of Inner and Outer Boxes: The inner panel is made of 304 stainless steel plate, which has good corrosion resistance, heat resistance, low temperature strength, and mechanical properties; Good hot workability such as stamping and bending, without heat treatment hardening phenomenon (non-magnetic, operating temperature -196 ℃~800 ℃). The outer material is treated with fine powder baking paint

Outer box light source: high brightness illumination lamp

Stratum structure design: a technology that effectively avoids condensation at the top of the box

Observation window: Observation size (for observing the sample used (W * L 28 * 35 cm)

Window anti sweat design: electric heating device to prevent water vapor condensation (40 W)

Test hole: Can be used for external testing of power cords and signals (with one 100mm diameter test hole on each side, equipped with two sealing plugs)

Machine pulley: Adjust the placement position by moving the pulley and fix it with strong bolts (200kg/wheel)

Insulation layer: 50mm rigid polyurethane foam

Xi'an Lichuang Material Testing Technology Co., LtdEstablished on November 18, 2005, legal representativeZhang Jianwei, CompanyLocated at No. 1706, 17th floor, Building 2, Maple Leaf High rise Community, downtown Xi'an, our business scope includes the development, production, and sales of material testing machines. (If the above business scope involves special monopoly regulations of the state, follow their regulations).