Fully automatic optical image measuring instrumentEquipped with powerful software and hardware technology, it can automatically measure geometric elements such as points, lines, circles, arcs, ellipses, angles, curves, lengths, widths, heights, hole spacing, spacing, thickness, arcs, diameters, radii, grooves, and R-angles with precision. It uses imported screw drive and servo control technology, combined with precise measurement software, to achieve efficient and accurate large-scale product testing, providing assistance for the detection and quality control of precision components. Widely used in industries such as hardware, plastics, electronics, molds, hardware processing, mobile phone accessories, computer accessories, automotive parts, clocks, circuit boards, etc.
Technical principle:
Optical imaging system:
Using a combination of high-resolution CCD/CMOS camera and variable magnification objective lens, capturing the image of the workpiece through LED cold light source (to avoid thermal deformation of the workpiece), and combining with autofocus and edge extraction algorithms to achieve micrometer level precision measurement.
Intelligent software control:
Equipped with specialized measurement software, it supports automatic learning batch measurement, CNC positioning detection, SPC data analysis and other functions, which can automatically correct the offset caused by workpiece differences and improve the accuracy of repeated measurements.
Daily cleaning and dust prevention:
Cleaning of optical components: Use specialized lens cleaning paper or soft cloth to clean the lens and screen, avoiding direct contact of alcohol with the coating surface.
Non optical component cleaning: Metal components need to be wiped with rust proof oil, and non-metallic parts can be cleaned with neutral cleaning agents or alcohol.
Environmental control: The workbench should be kept dust-free, with a recommended temperature of 20 ℃± 5 ℃, humidity below 60%, and equipped with shockproof measures.
Mechanical system maintenance:
Lubrication of moving parts: Regularly lubricate the guide rails, screws, and gears to ensure smooth movement and reduce wear.
Fixture and platform inspection: The four station fixture needs to be stably calibrated, the glass platform should avoid collision, and the levelness needs to be adjusted regularly.