One click measuring instrumentThe measurement principle of the flash tester, also known as a one key fixed measuring instrument, is achieved through a new type of image measurement technology. The image of the measured workpiece or object is reduced by a telecentric lens with a large depth of field, large field of view, low distortion, and high numerical aperture. The image measurement is then digitized by a CMOS camera, and finally, the built-in program of the background image measurement software selects the various measurement contours (bottom contour, surface contour) of the product or workpiece and compares them with the calibration ruler of the CMOS camera before and after, and calculates the various dimensions of the product.
Instrument features:
1. Free placement of products, no need for fixture positioning, automatic recognition by instruments, automatic matching of templates, and one click measurement.
2. Up to 512 parts can be measured simultaneously.
3. Support CAD drawing import, one click automatic matching measurement.
4. In NC mode, batch measurement can be performed quickly and accurately.
5. Anyone can quickly get started without complex training.
6. A simple user interface that allows anyone to easily set and measure.
7. Immediately evaluate the measurement size deviation at the measurement site, and generate statistical analysis, testing result reports, etc. with one click.
Operating standards and maintenance:
Usage process:
Calibration: Use standard measuring tools to calibrate, ensuring that the environment is free of vibration and the temperature is stable (15-25 ℃);
Measurement: Place the workpiece arbitrarily → Press one button → The system automatically recognizes and outputs the result.
Maintenance requirements:
Regularly clean the lens and stage to avoid dust affecting imaging;
Verify accuracy every six months, with temperature fluctuations of ≤± 2 ℃.