Recently, our company (Dier Chemical Packing Co., Ltd., Pingxiang City, Jiangxi Province)Installation and annual production of a chemical enterprise in Xinxiang, Henan Province50Tower internals and fillers for the 10000 ton nitro compound fertilizer project, successfully completedscrubberAcidic tail gas scrubbing tower, ammonia scrubbing tower, granulation tail gas scrubbing towerInstallation work,Due to the diameter of the tower being6 meters and facing urgent construction requirements from the owner,In order to complete the installation task within the specified timeOur company arranges professional installation personnel to carry out on-site installation work,Although there were some issues with the installation between the tower body and the tower during the installation process, our company has provided a reasonable rectification plan to address themEnsure that customers can smoothly start production as scheduledAnd proceed in an orderly manner.
This project consists ofFour towers，The overall process design is carried out by our company, mainlyloadFor finished products such as trough liquid distributor, Bauer ring packing, and supporting pressure grid, the details are as follows:

scrubberT68001

lThe designed tower diameter isΦ6000mm.

lSet up in the entire tower1The filling material for the Duan Bao'er ring loose pile isBED1#The packing model is50#Ball ring, with a packing height of5Rice.

lBED1#Above the filling sectionSet up feed pipes and trough liquid distributors, forThe liquid is evenly distributed.

lThe upper and lower ends of the packing are distributed with packing pressure rings and packing supports to limit and support the packing section.

lOperational flexibility:60%~120%.

Acid tail gas scrubbing towerT68101

lThe designed tower diameter isΦ2800mm.

lSet up in the entire tower1The filling material for the Duan Bao'er ring loose pile isBED1#，The diameter of the packing section isΦ2800mm，The packing model is38#Ball ring, with a packing height of6Rice.

lBED1#Above the filling sectionSet up the feed pipe and trough liquid distributor to feed the liquid intoUniformly distributed rows.

lThe upper and lower ends of the packing are distributed with packing pressure rings and packing supports to limit and support the packing section.

lOperational flexibility:60%~120%.

Ammonia washing towerT68102

lThe designed tower diameter isΦ1500mm.

lSet up in the entire tower1The filling material for the Duan Bao'er ring loose pile isBED1#，The diameter of the packing section isΦ1500mm, fill inThe material model is38#Ball ring, with a packing height of3Rice.

lBED1#Set above the filling sectionFeed inlet and install spray distributor;

lThe upper and lower ends of the packing are distributed with packing pressure rings and packing supports to limit and support the packing section.

lOperational flexibility:60%~120%.

Granulation tail gas washing towerT68103

lThe designed tower diameter isΦ6000mm.

lSet up in the entire tower1The filling material for the Duan Bao'er ring loose pile isBED1#The packing model is50#Ball ring, with a packing height of5Rice.

lBED1#Above the filling sectionSet up the feed pipe and trough liquid distributor to distribute the liquidUniformly distribute the body.

lThe upper and lower ends of the packing are distributed with packing pressure rings and packing supports to limit and support the packing section.

lA feed distributor is installed at the gas phase inlet of the tower kettle to ensure the initial uniform distribution of the gas phase.

lOperational flexibility:60%~120%.

The following are pictures of the installation site: