Introduction and usage explanation of freezing point tester for refrigeration oil

Brief description:

The freezing point measuring instrument for refrigeration oil complies with GB/T12577. This instrument is suitable for measuring the freezing point of refrigeration oil mixed with refrigerant in a closed environment. This instrument adopts a national standard.

Technical features of BSY-206 freezing point tester for refrigeration oil:

1. This instrument consists of two parts: a Dewar flask insulation bath and a refrigeration system.

2. The refrigeration system adopts a cascade refrigeration system with good refrigeration effect, and the lowest temperature of the cold bath can reach -88 ℃, meeting the requirements of the flocculation point test specified in the corresponding standards.

3. The cold bath device of this instrument can perform parallel experiments on 7 test tubes simultaneously; The Dewar flask has good insulation performance and excellent visibility.

Technical specifications of BSY-206 freezing point tester for refrigeration oil:

1. Working power supply: AC (220 ± 10%) V 50Hz

2. Refrigeration method: Compressor refrigeration

3. Cooling rate: ≈ 1 ℃/min

4. Temperature range:+50~-88 ℃

5. Working method: 7-hole Dewar flask insulation bath, capable of simultaneously making 7 samples

6. Environmental temperature: 15 ℃~30 ℃

7. Relative humidity: ≤ 85%

8. Power consumption of the whole machine: not exceeding 1700W

9. Dimensions: 970mm x 440mm x 600mm (length x width x height)

10. Weight: 65kg