Explanation of the Simulation Experiment Process of BSY-113 Copper Corrosion Tester for Petroleum Products

Brief description:

This instrument is designed and manufactured in accordance with the requirements of the national standard GB/T5096 "Copper Corrosion Test Method for Petroleum Products". It is suitable for evaluating the degree of copper corrosion caused by petroleum products such as aviation gasoline, aviation turbine fuel, vehicle gasoline, agricultural tractor fuel, washing solvents, kerosene distillate fuel, and lubricating oil according to the test method specified in this standard.

Technical characteristics of BSY-113 copper corrosion tester for petroleum products:

1. A constant temperature bath is composed of LED display or LCD temperature controller, heater, and electric stirrer, with uniform temperature inside the bath.

2. The intelligent timer automatically counts the test time and will also sound an alarm when it is set.

3. Equipped with a standard color palette to meet the requirements of experimental comparison.

4. This instrument has 4 sample test holes, each hole can hold one test cartridge or 3 test tube samples for simultaneous testing, with high testing efficiency.

Technical specifications of BSY-113 copper corrosion tester for petroleum products:

1. Bath temperature: room temperature~200 ℃

2. Temperature control accuracy: ± 0.1 ℃

3. Sensor: Pt100

4. Temperature controller: an intelligent instrument based on microprocessors for temperature control, digital display of temperature, and temperature correction function

5. Timer: 1 minute to 99 hours, automatic timer, buzzer prompt

6. Power supply voltage: 220V 50Hz

7. Whole machine power consumption: ≤ 1500W

8. Sample hole: 4

9. Number of measured samples: 4-12

10. Environmental temperature: 5-35 ℃

11. Relative humidity: ≤ 85%

12. Instrument material: Stainless steel frosted plate

13. Dimensions: 450 * 300 * 600

14. Weight: 20kg