BSY-142 Lubricating Oil Air Release Value Tester Display Video

Instrument Overview:

This instrument is based on industry standards for petroleum and petroleum productsDesigned and manufactured in accordance with the requirements of SH/T0109-2004 "Determination of Water Resistance Performance of Lubricating Greases", it is used to evaluate the ability of lubricating grease to resist being washed out of bearings by water under specified experimental conditions at 38 ℃ and 79 ℃. Method summary: Install lubricating grease into the ball bearing sleeve, rotate it at a speed of 600 ± 30r/min, control the water temperature, and spray it onto the bearing sleeve guard plate at a flow rate of 5 ± 0.5ml/s within 1 hour to measure the amount of lubricating grease that is washed away by water.

Technical features of BSY-160 lubricant anti water dripping performance tester:

1. This instrument adopts stainless steel heating tube heating method, with fast heating speed.

2. The bearing assembly meets the standards and is easy to disassemble and assemble.

3. Adopting intelligent temperature control instruments to ensure the required accuracy, stability, and reliability of the experiment.

4. Using an intelligent timer for timing, it can be accurate to 0.1 seconds.

Technical specifications of BSY-160 lubricant anti water dripping performance tester:

1. Working power supply: AC 220V ± 10% 50Hz

2. Power consumption: 600W

3. Temperature control method: digital display temperature controller

4. Temperature control range of sink: room temperature~100 ℃

5. Temperature control accuracy of sink: ± 2 ℃

6. Temperature sensor: Pt100 (platinum resistance)

7. Bearing sleeve speed: 600 ± 30r/min

8. Jet water flow rate: 5 ± 0.5ml/s

9. Sink capacity: ≥ 750ml

10. Motor power: 15W

11. Spray pump: 90W

12. Environmental temperature: 5-30 ℃

13. Environmental humidity: ≤ 85%

14. Dimensions: 450 * 350 * 450

15. Weight: 25kg