As we know, all equipment needs to be maintained and serviced after use in order to better extend its service life while highlighting product performance. Below, we will explain it to youD671x Pneumatic Clamp Butterfly ValveSome basic precautions for use:
D671x Pneumatic Clamp Butterfly ValvePrecautions for use
1. The d671x pneumatic clamp butterfly valve can be installed on pipelines at any position in space.
2. The installation position of the d671x pneumatic clamp butterfly valve should ensure ease of use, maintenance, and replacement.
3. When installing this butterfly valve, the direction of pipeline medium flow can be disregarded, allowing for bidirectional flow.
4. The d671x pneumatic clamp butterfly valve should be stored indoors in a dry place before installation, with the valve plate slightly open by 4 ° to 5 °.
5. Before installing the d671x pneumatic clamp butterfly valve, the following work should be carried out:
a、 Carefully verify whether the usage complies with the performance specifications of this butterfly valve.
b、 Clean the inner cavity and sealing surface, and do not allow any dirt to adhere. Do not open or close the butterfly plate before cleaning.
c、 Check if the transmission device is reliably connected to the flange on the butterfly valve.
6. When clamping the butterfly valve in the pipeline, pay attention to whether the connection force is uniform and reliable.
7. After installing the butterfly valve, the valve plate must be in the open position during the pipeline strength pressure test.
The above precautions need to be paid attention to when using the d671x pneumatic clamp butterfly valve. Proper use and maintenance of the d671x pneumatic clamp butterfly valve ensure its better performance and ensure our production safety.