oscillatorThe usage method

1Load the test bottle and maintain balance. If it is a dual function model, set the oscillation mode.

2Connect the power and set the timer according to the surface scale of the machine. If you need to work for a long time, adjust the timer to“Normally Open”Location.

3Turn on the power switch and set the constant temperature:

（1）Place the control switch in“setting”At this point, the temperature displayed on the screen is the set temperature. Adjust the knob to set it to the temperature you need for your work. (The working temperature you set should be higher than the ambient temperature. At this time, the machine starts heating up and the yellow indicator light is on. Otherwise, the machine will not work.)

（2）Place the small switch in the control section“measurement”At this time, the temperature displayed on the screen is the actual temperature of the air inside the test chamber. As the temperature inside the chamber changes, the displayed number will also change accordingly.

（3）When heated to the desired temperature, the heating will automatically stop and the green indicator light will turn on; When the heat inside the test chamber dissipates below the temperature you set, a new round of heating will begin.

4Activate the oscillation device:

（1）Turn on the oscillation switch on the control panel, and the indicator light will turn on.

（2）Adjust the oscillation speed knob to the desired oscillation frequency.

5After completing the work, cut off the power and set the speed control knob and temperature control knob to the lowest point.

6Clean the machine and keep it clean.

oscillatorPrecautions for use

1Equipment should be placed on a sturdy workbench, with a clean and tidy environment and good ventilation.

2The power sockets provided by users should have good grounding measures.

3It is strictly prohibited to move the machine during normal operation.

4It is strictly prohibited for objects to collide with the machine.

5Children are strictly prohibited from approaching the machine to prevent accidents.

6Before replacing the fuse, ensure that the power supply has been cut off.

7After use, please clean the machine without leaving any water droplets or dirt residue.

For more details, please log inhttp://www.huahengyiqi.com/Product.asp?ClassID=298