Product Introduction：

The HT-LX100 online hydrocarbon remover is a device for purifying air sources. It catalyzes the cracking of total hydrocarbons in compressed air to produce zero order air with less than 0.1PPm hydrocarbons. In the heating catalyst, the hydrocarbons are converted into carbon dioxide and water vapor, which are then separated by the device for removing carbon dioxide and water to obtain zero order air. This effectively improves gas quality and ensures a stable chromatographic baseline.

Technical Specifications:

Output relative concentration of hydrocarbons in the air:＜0.1PPm
Input relative concentration of hydrocarbons in the air:＜100PPm
Input air pressure: 0~0.6MPa
Output traffic: 0~1000mL/min

Temperature display: 7-segment LED digital tube

Working temperature: 400~500℃（The factory setting is 400℃）
Operating environment temperature: 0~40℃，well-ventilated
Environmental humidity for use:＜85%, without condensation
Working voltage:AC220V±10%50/60Hz
Rated power＜550W

outsidetypeSize: 185mm×483mm×449mm（H×W×D）

Gas interface：NPT 1/8 internal thread
uselifespan：＞25month(Under normal usage conditions)
Instrument weight：Net weight 21Kg

Installation method: 19 "rack mounted

Instrument Features：

Suitable for 19 inch standard cabinets
Strong adsorption capacity for hydrocarbons and other substances
No vibration, low noise
Dual filter
Automatic and manual drainage functions
Catalytic modularization, easy to replace