HT-SY80-EXExplosion proof oxygenanalysis system

HT-SY80-EXExplosion proof oxygen analysisSystem Overview:

explosion-proofoxygenThe analysis system consists of three parts: preprocessing, sampling, and analysis. The preprocessing part uses neutralization, dilution, or adsorption methods to remove or dilute media that may affect sensor measurements in the sample gas to an allowable concentration, in order to ensure the lifespan and measurement accuracy of the analysis part.
It has been widely used in industrial fields such as chemical industry, oil refining, building materials, metallurgy, electricity, environmental protection, pharmaceuticals, food, and national defense：Online monitoring of thermal power, centrifuges, reactors, tanks, pipelines, etc.

Note: Our company can design and produce various pretreatment systems and supporting analytical instruments based on user requirements and specific working conditions.

Sampling gas path connection diagram

HT-FX100-O₂gastransmitter

Technical Specifications:

• Measurement principle:fuel cell
• Display mode:segment codedisplay
• Measuring range:01000ppm，01.00%，0~25.00% O₂

(Available in different ranges: trace or constant)

• Measurement accuracy:0~1000ppm/1%/25.00%≤±1%FS

0~100ppm≤±2%FS

0~10ppm≤±5%FS

• heavy again Sex:≤±1%FS
• Response time:T₉₀≤60S
• outputInterface:4-20mA. DC(Non isolated output,24VWorking power supply voltageWhen,load resistor≤600Ohm)

1Programmable dry contact type passive alarm output，Large contact capacity220VAC/2A

• contact method：RS485
• workpower supplyDC24V±10%，100mA
• environmenttemperature：-10℃~+50℃
• storeambient humidity:＜90%RH, non condensing
• workambient humidity:＜100%RH, non condensing
• sample gastemperature：0℃~40℃
• Sampling method: through type
• enterBarometric force:95kPa~105kPaStable pressure atmosphereControl the pressure within the specified range to ensure that it can provide400~600mL/minTraffic is sufficient）
• Sample gas groupcopy: No strong corrosive gases
• Specifications and dimensions:160.5mm×250m×92.5mm（H×W×D）
• Explosion proof grade:Exd IICT6 Gb
• Certificate Number：CNEx19.1804X
• Service life:>24aMonth (under normal usage conditions)
• Installation method: Wall mounted

Instrument features:

• Segment code displayDisplay, intuitive display, simple and convenient operation;
• *fuel cellOxygen sensor, with fast response speed, high measurement accuracy, good linearity, long calibration cycle, resistance to weak acids and weak bases;
• Menu lock function to prevent accidental changesinstrumentParameters that affect its performance;
• In explosion-proof situations, it can be achieved throughIsolation typeMagnetic pen completes menu settings for easy on-site operation;
• high-precisionAutomatic temperature compensation function,eliminateThe measurement error caused by temperature changes;
• Calibration at any point within the entire range is sufficient, without the need for multi-point calibration, making calibration simple and convenient;
• measurement range0.1ppm~25.00％O₂；
• Explosion-proof ratingExd IICT6.

Application scenarios:

The requirement for explosion-proof rating isExd IICT6Trace amounts in the environmentorConstant oxygen concentration measurement.

Ordering Instructions(Please specify when placing an order)

• Instrument measurement range
• Measure whether the medium contains acidic gases (such asCO₂Etc.)
• Main components, impurities, and sulfides of the tested gas