How to analyze soil fertility with a multi parameter soil analyzer

1First, remove about 5 centimeters of topsoil; Then crush the soil downwards to a depth of 15 centimeters. Clean up all organic impurities in the soil that may affect the test results, such as leaves, roots, etc;

2Soak the soil in water and mix well to form a mud like consistency. (using rainwater or distilled water);

3Adjust the function key of this device from the middle down to the 'fertilizer' position;

4Wipe the probe clean with the special cleaning cotton pad included with the purchase;

5Insert the probe into the soil being tested;

6Read data after 5 seconds;

7Return the function keys to the middle 'off' position;

8Clean the probe thoroughly and air dry it;

9Store well for future use;

10. If you need to continue analyzing other soils, please repeat the above steps.

Analysis results of multi parameter soil analyzer

If the analysis results show that 'too little' means: lacking

1Dissolve fertilizer in water and then supplement nutrients to crops by watering;

2Within three weeks after planting or transplanting plants, watering and fertilization should be combined, and this should be done every month when watering the plants.

If the analysis results show that 'ideal' means: ideal

- Combined with watering, fertilize once a month;

If the analysis results show 'too much', which means: excessive

1Just water it;

2Transplant the plants back into new soil;

3For plants in the greenhouse, they should be watered extensively to dilute and rinse excess nutrients;

4Do not apply any more fertilizers, but you can apply substances such as manure, compost, plant residues, etc.