Automatic liquid-liquid extraction deviceApplied to research on the cultivation of microorganisms, viruses, animal and plant tissue cells in the fields of medicine and health, agriculture, animal husbandry, environmental protection, and education.
Product Features:
1. Adopting high-power DC motor, microcomputer speed control system, stable oscillation speed, and clear and intuitive LED digital display.
2. The oscillation angle can be freely adjusted within the range of 0-15 ° according to user requirements.
3. Can simultaneously clamp different capacity separating funnels.
4. The instrument adopts a weighted base design, which runs smoothly and without displacement during high-speed oscillation.
5. The instrument comes standard with 6 separating funnel fixtures, and 8 separating funnel fixtures can be configured according to user requirements (price separately).
Core maintenance skills:
Daily cleaning: After each use, remember to use a dust-free cloth dipped in ethanol or distilled water to clean the outer shell and sample table. If there are residues in containers such as extraction bottles and separation funnels, soak them in ethanol or acetone for a while and then rinse. Do not use hard objects to scrape, as it may damage the inner wall.
Pipeline inspection: After use, be sure to rinse the pipeline and extraction channel with distilled water to prevent solvent crystallization from blocking. Regularly check if there is any leakage in the interface and sealing gasket. If the sealing ring becomes hard or cracks, replace it as soon as possible.
CNC pump tube maintenance: This is crucial. If the flow rate slows down or the pump tube is stuck or worn, replace it immediately. If not in use for a long time, remember to unplug the power and loosen the pump head tube clamp to avoid sticking the pump tubes together.
Seal maintenance: O-rings and gaskets should be regularly inspected and replaced if they are worn or damaged to prevent leakage.
Electrical system inspection: Power cords and sockets should be regularly checked for damage or aging, and circuit boards and sensors should also be noted for timely repair if there are any problems.
Long term shutdown management: If the equipment is not used for a long time, remember to clean the pipelines and components, dry them, seal them properly, unplug the power, relax the CNC pump tube, and place it in a dry and ventilated place. It is best to cover it with a dust cover and occasionally turn on the power.