The gas bath oscillator is an instrument product that uses gas bath oscillation to work. The basic usage method for this product is to first clamp the sample holder of the oscillating culture vessel with the tray mesh holder, close the switch, and then operate after the indicator light is on. For a rated instrument, the operation method is particularly important. After the light is on, it indicates that the internal power supply has been turned on. At this time, set the temperature to the temperature you need. The timer is set to the working time you need. The timer rotates counterclockwise to be normally on, and clockwise to be timed. Adjust the speed knob again until you reach the desired oscillation frequency. At this point, the machine enters normal working condition.

The gas bath oscillator also requires a series of usage precautions in our daily use, especially prohibiting the entry of various liquids into the working chamber to avoid damaging the main unit. The instrument should be placed steadily during use and cannot be tilted. When removing or placing it in a container, it should be turned off before use. It is particularly important to note that the socket must have a safety grounding device, and the power should be turned off after work is completed. Our products come with a one-year warranty and lifetime maintenance. For external instruments, they should be properly grounded to avoid accidents.