-
E-mail
jttjyq@163.com
-
Phone
13585400372
-
Address
No. 22 Hongshan Road, Jincheng Industrial Park, Jintan City, Jiangsu Province
Changzhou Tianjing Experimental Instrument Factory
jttjyq@163.com
13585400372
No. 22 Hongshan Road, Jincheng Industrial Park, Jintan City, Jiangsu Province
1Separatory funnel oscillatorProduct Overview:
Separatory funnel oscillatorAlso known as a vertical oscillator, this machine adopts a microcomputer timing and speed regulation system, with a DC motor as the driving source. It has the characteristics of constant and adjustable speed, digital speed display, easy operation, track type operation, and smooth operation. It is widely used in scientific research, teaching, and production departments such as biological products, genetics, viruses, medicine, and environmental protection. It is one of the commonly used experimental equipment in laboratories.
IISeparatory funnel oscillatorProduct Features:
1Adopting a high-power DC motor and a microcomputer speed control system, the oscillation speed is stable,LEDThe digital display is clear and intuitive.
2The oscillation angle can be adjusted according to user requirements0-15Free adjustment within the range of degrees.
3Can simultaneously clamp different capacity separating funnels.
4The instrument adopts a weighted base design, which runs smoothly without displacement during high-speed oscillation.
5Instrument standard configuration6Splitting funnel fixture only
3、 Separatory funnel oscillatorProduct Usage
1. Extraction of formaldehyde content in cosmetics
2. Extraction of vitamins
3Extraction operation of pre-processing for environmental analysis
4Extraction of natural substances such as food and oil
5Extraction of pesticide residues
6Extraction of harmful substances from soil
7Extraction of water pollution detection
4Separatory funnel oscillatorTechnical Specifications:
1Vibration speed: Start up-300time/divide
|
2Amplitude of oscillation:35mm 3Timing range:1minute-99Hour or normally open 4Work load: ≤10kg 5、 Maximum bottling volume:100ml-1000mlSeparation funnel ×6only 6Overall power:200W 7Adjustment range of oscillation angle:0-15° 8Electricity Source:220v 50Hz 5Separatory funnel oscillatorUsage: Before use, place the instrument on a sturdy workbench and keep it stable. The usage environment should be clean, dry, and well ventilated. Firstly, adjust the height of the fixture according to the capacity of the separating funnel, and tighten the fixing screws. When in use, it should be placed symmetrically on both sides. The method of adjusting the oscillation angle is to loosen the screws at both ends of the oscillation frame, and then move them simultaneously. After adjustment, the screws must be tightened. Next, connect the power supply, turn on the power switch, the power indicator light will turn on, click︽or︾Select the oscillation speed with the key, and then clickMandHKey selection for timed time（MminuteHHour), click after setting is completerunPress the key to start running. To stop, click on itstopJust press the keyAfter use, turn off the power and set the oscillation speed to be maintained for future use. |
VISeparatory funnel oscillatorNotes:
1Before use, please test the machine with no load to see if it is working properly, and then clamp the separating funnel reagent bottle.
2Before each use, check whether all screws are tightened.
3The clamping and separating funnel reagent bottle has a similar weight difference on both sides to avoid the phenomenon of being too heavy.
4If the number of reagent bottles is insufficient, they can be placed symmetrically.
5When oscillating, the solution inside the bottle should not exceed the limit of the reagent bottle1/3For good.
6Medium speed use is beneficial for extending the service life.
7The instrument is used220v，50HzPower supply, so please use a three hole socket with safety grounding.
note:Customizable according to customer requirements