Variable frequency freezing full temperature shaker

1Variable frequency freezing full temperature shakerBrief Overview

Using air heating, digital temperature measurement, and digital speed measurement, it is mainly suitable for oscillation cultivation of various liquid and solid compounds such as biology, biochemistry, cells, and bacterial strains in research departments such as universities, medical institutions, petrochemicals, health and epidemic prevention, and environmental monitoring. The frozen air bath constant temperature oscillator, also known as the air bath constant temperature shaker, uses intelligent temperature control instruments and LED displays for temperature control in this series of products. High temperature control accuracy, touch button, easy operation, accurate and intuitive display, reliable performance. There are lighting fixtures in the studio for easy observation, and the studio is equipped with high-quality fan devices to force air convection and achieve more uniform temperature distribution.

IIVariable frequency freezing full temperature shakerTechnical parameters:

1. Model: KM-ZD-88

2. Power supply: AC 220V ± 10% 50Hz ± 2%

3. Temperature control range: 5~50 ℃

4. Temperature control accuracy: ± 1 ℃ (LED digital temperature control)

5. Oscillatory tray: 470 × 370 (mm)

6. Oscillation speed: 0~280 revolutions per minute

7. Oscillation amplitude: 20mm (dual function of reciprocating oscillation and rotary oscillation)

8. Timing range: 0-120 minutes

IIIVariable frequency freezing full temperature shakerUsage:

Insert the power cord plug into the corresponding socket of the oscillator, and then insert the three pin plug into the power socket. At this time, the power is turned on, and the oscillator oscillation speed can be adjusted according to your requirements using the speed knob.

4Variable frequency freezing full temperature shakerNotes:

1. To ensure safety, please connect the ground wire when using.

2. The instrument should be kept clean and dry, and liquids are strictly prohibited from entering the machine

3. Load the test bottle and maintain balance. If it is a dual function model, set the oscillation mode. (See the diagram below for detailed settings)

4. Connect the power and set the timer according to the surface scale of the machine. If you need to work for a long time, adjust the timer to the "normally open" position.

5. Turn on the power switch and set the constant temperature:

6. Load the test bottle and maintain balance. If it is a dual function model, set the oscillation mode. (See the diagram below for detailed settings)

7. Connect the power and set the timer according to the surface scale of the machine. If you need to work for a long time, adjust the timer to the "normally open" position.

8. Connect the power and set the temperature: Press the SET button to set or view the temperature setpoint. Press the SET key and the digital display character will start flashing, indicating that the instrument has entered the set state. Press the △ key to increase the set value, press the ▽ key to decrease the set value. Long press the △ key or ▽ key to quickly change the data. Press the SET key again to return the instrument to normal working state and complete the temperature setting. If the temperature controller is intelligent, a separate temperature control manual should be attached This machine has two indicator lights for heating and constant temperature to indicate the working status, and the temperature gauge shows the actual temperature inside the pot.

5Variable frequency freezing full temperature shakerActivate the oscillation device:

Turn on the oscillation switch on the control panel, and the indicator light will turn on.

Adjust the oscillation speed knob to the desired oscillation frequency.

After completing the work, cut off the power and set the speed control knob and temperature control knob to the low point.

Clean the machine and keep it clean.

VIVariable frequency freezing full temperature shakerAfter sales service: This product is covered by the "three guarantees" policy, which includes a one-year warranty and lifetime maintenance. During the product warranty period, the supplier shall provide all damages and repairs caused by non-human factors. After the product warranty period, charges shall be made at the discretion of the supplier.

The company promises the business principle of "honesty as the foundation" and provides effective and reliable services to users. We will continue to develop towards diversification and scale with modern management as the foundation and continuous innovation as the goal.