Characteristics and uses of standard sampling equipment:
The National Standards for the Construction of Radiation Environment Monitoring and Supervision Institutions require environmental monitoring equipment to be equipped with soil samplers, water quality samplers, and atmospheric samplers (standard sampling equipment), which are small sampling devices developed for environmental monitoring and health and epidemic prevention departments. This instrument can quickly and accurately collect:Soil samples, water quality samples, harmful gasesSamples provide a basis for laboratory testing

• This instrument is a portable device equipped with an aluminum alloy portable case, making it convenient for staff to carry
• Adopting direct current or manual operation, it is convenient for monitoring personnel to use it without alternating current

ETC-300Soil sampler
1: Stainless steel heart-shaped loam drill bit: One sampling length of 20cm, threaded connection
2: T-shaped handle: 35cm long, threaded connection
3: Extension rod: 50cm long, with markings, threaded connection
4: Extension rod: 100cm long, with markings, threaded connection
5: Scraper: made of stainless steel material, 20mm wide, used for scraping soil samples
6: Wrench: 19 × 22mm, used for disassembling and installing sampling drills
7: Gloves: Good breathability on the back of the hand, made of cowhide material
8: Steel tape measure: 3 meters
9: Portable bag: 110cm long, used to store the above components
ETC-1Bottle type deepwater sampler:
1: Four aluminum alloy sampling rods, each measuring 1 meter in length
2: Two sampling bottles with a capacity of 1000ml, made of transparent PVC material
3: One stainless steel control valve
4: One cable
*Can also be configured with a bucket type water quality sampler (sampling depth up to 20 meters)
ETT-2000 Dual Channel Atmospheric Sampler
1: Sampling flow range: 0.1-1.5Lmin (expandable to 2.0Lmin, dual flow), degree: ± 2.5% Dual channel atmospheric sampling
2: Pump load: When the resistance is 5.3kPa, the flow fluctuation is less than 5%
3: Sampling time setting: 0-24h (any setting) Digital display
4: Working voltage: AC/DC dual use, built-in rechargeable battery
5: Power: ≤ 10W; Noise: ＜ 60dB (A)
6: Dimensions: Approximately 220 × 160 × 140mm (length × width × height)
7: Instrument weight: approximately 1.5 kilograms

Jintan Kanghua Electronic Instrument Manufacturing Factory: