TC-501D High and Low Temperature Cold Heat Exchange Cycle Instrument Working Video

TC-501DWorking principle of high and low temperature cold heat exchange cycle instrument:

The exchange and immersion of samples between high and low temperature tanks are completed by mechanical units, and this instrument is a single arm rotating immersion type. After immersing the sample in a low-temperature bath for a certain period of time, remove it from the liquid surface and rotate it180After entering the high-temperature tank and staying for a certain period of time, the liquid level is raised again to circulate once, and the technician counts once. After the sample is raised from the water surface, it is transferred from the low-temperature tank to the high-temperature tank and immersed again in the water surface for a time interval of approximately5-300Adjustable in seconds (high and low temperature exchange device).

TC-501DTechnical parameters of high and low temperature cold heat exchange cycle instrument:

1Temperature control range of low-temperature tank:0～100℃, constant temperature wave degree: ≤±0.5℃； Temperature control range of the constant temperature bath:RT+5～100℃, constant temperature wave degree: ≤±0.8℃. Accuracy is: ±0.1℃, uniformity is: ±0.3℃。

2Low temperature tank cooling power:368WHeating power:800W×2(Double slot)

3Liquid tank volume: ≥10L

4Adjustable range of slot to slot conversion speed:2—20 rpm

5Adjustable range of dwell time in the slot:5-300 s(Conversion time tentatively set)30S）

6Adjustable range of cycle times:1-9999time

7Controller surface:LEDDisplay, can control temperature, conversion speed, dwell time, and number of cycles

8The load of the conversion bracket shall not be less than250G

9Reference values for external dimensions:850×400×700mm

10The shell adopts1.0Made of cold plate electrostatic spraying, with high-quality inner liner304Made of stainless steel.