-
E-mail
jingda17@163.com
-
Phone
13915810870
-
Address
Jintan Economic Development Zone, Jiangsu Province
Changzhou Jintan Jingda Instrument Manufacturing Co., Ltd
Key points for use and daily maintenance of biological constant temperature cultivation shaker
Date: 2025-11-19Read: 1
Biological constant temperature cultivation shakerAs an important equipment for cultivating biological samples such as cells and bacteria in the laboratory, its standardized use and scientific maintenance directly affect the reliability of experimental results and the service life of the equipment. Mastering the correct usage methods and daily maintenance points is the key to ensuring the stable operation of equipment. 
1、 Standardize the usage and operation process
The use of a shaker requires adherence to standardized operating procedures. Before starting the equipment, check if the shaker is placed smoothly to avoid abnormal vibrations during operation. Select appropriate culture containers and fixtures according to experimental requirements to ensure that the samples are firmly fixed and do not obstruct air circulation. When setting temperature and oscillation parameters, it is necessary to refer to the experimental plan requirements to avoid exceeding the operating range of the equipment. When loading samples, it is necessary to maintain uniform distribution to prevent local overheating or oscillation imbalance. During operation, do not frequently open the box door unless necessary to avoid affecting the temperature stability and cultivation environment inside the box. After use, the temperature should be adjusted to a safe range before turning off the equipment to avoid sudden power outages that may cause damage to the device. For experiments that run continuously for a long time, it is necessary to pay special attention to the operating status of the equipment and regularly check whether the cultivation environment is normal.
2、 Key measures for daily maintenance
Daily maintenance is a guaranteeBiological constant temperature cultivation shakerThe foundation for long-term stable operation. Cleaning work needs to be carried out regularly, using mild cleaning agents to wipe the inner and outer surfaces of the box, and avoiding the use of highly corrosive chemical reagents. The oscillation transmission components should be regularly checked for lubrication, and an appropriate amount of lubricating oil should be added if necessary, but attention should be paid to avoiding lubricating oil contamination of the cultivation environment. The calibration of temperature sensors and oscillation control systems should be carried out according to the manufacturer's recommended cycle to ensure measurement and control accuracy. Power cords and plugs should be regularly inspected for damage or aging to prevent electrical safety hazards. For equipment that is not used for a long time, it should be cleaned and placed in a dry and ventilated place, and regularly powered on to maintain the good condition of mechanical components. The rubber seals inside the incubator need to be regularly inspected, and if there is aging or deformation, they should be replaced in a timely manner to maintain the sealing performance of the box.
3、 Precautions and safety regulations
When using and maintaining, safety regulations cannot be ignored. The equipment should be placed on a flat and stable tabletop, with sufficient space reserved around for heat dissipation and maintenance. Electrical connections must comply with safety standards and use power sockets with grounding wires. Operators should receive professional training and be familiar with the characteristics and operating procedures of the equipment. For experiments involving the cultivation of hazardous microorganisms, it is necessary to ensure that the equipment has the corresponding biosafety protection level. Be sure to cut off the power supply before maintenance to prevent the risk of electric shock. Establish comprehensive equipment usage and maintenance records, track the operation status and maintenance history of equipment, and provide a basis for equipment management.
Biological constant temperature cultivation shakerStandardized use and scientific maintenance are important links in ensuring experimental quality and equipment lifespan. By establishing standardized operating procedures, implementing daily maintenance of the system, and adhering to strict safety regulations, not only can reliable experimental results be obtained, but equipment lifespan can also be extended, providing a solid guarantee for the efficient operation of the laboratory.