Key points for product usage

1: Using at medium speed within the speed range can extend the lifespan of the instrument.

2: The instrument should be placed on a sturdy workbench, with a clean and tidy environment, moderate temperature, and good ventilation.

3: Before using the instrument, place the speed control knob in the minimum position.

4: Clamp the test bottle.

When installing test bottles on a vertical workbench, heavy test bottles should be avoided from being placed at both ends of the workbench. The culture medium in each bottle should be roughly equal. If there are not enough culture bottles, the test bottles can be symmetrically placed or filled with other equal amounts of solution to fill the empty spaces.

5: Connect the external power supply, place the power switch in the on position, the indicator light will turn on, slowly adjust the speed control knob to the desired speed.

6: Before each shutdown, the speed control knob must be placed in the smallest position before cutting off the power. Repair and maintenance of RS-2 separating funnel oscillator

Separatory funnel oscillatorMaintenance and upkeep methods

1: Proper use and maintenance of instruments can prolong their service life by keeping them in good working condition.

2: During continuous operation, the instrument should be regularly inspected every three months to check for any water droplets, dirt, or other debris falling onto the motor and control elements; Check fuses, control components, and fastening screws.

3: The bearings of the transmission part have been filled with an appropriate amount of lubricating grease (No. 1 calcium sodium base) before leaving the factory. During continuous operation of the instrument, lubricating grease should be added every six months, with a filling amount of about I/3 of the bearing space.

4: The natural wear and tear of the instrument after long-term use is a normal phenomenon. After one year of use, if abnormal noise is found in the motor of the instrument; The bearings in the transmission part are worn, and the belt is loose or cracked; Failure of electronic control components, etc