One:ETC-1 bottle type deepwater samplerbrief introduction:

The ETC-1 bottle type deepwater sampler is a tool for manually collecting water samples, mainly used in environmental protection, hygiene and epidemic prevention, tap water, chemical and other units. Used for collecting water samples from deep, distant, and other areas where manual collection is inconvenient.

Secondly:ETC-1 bottle type deepwater samplerMain components:

The ETC-1 bottle type deepwater sampler mainly consists of three parts: sampling rod and sampling bottle, and control valve.

The sampling rod is made of alloy material and consists of 4 sections, all of which are made into a telescopic type. When working in the field, they can be tightened through connecting joints and have a length of up to 4 meters. It can be shrunk into a one meter long pole when not in use, making it easy to carry

The sampling bottle is made of PVC material, which is lightweight, not easy to break, has good purity, and does not affect water quality. The cable is mainly used for controlling valves

Three:ETC-1 bottle type deepwater samplerInstructions for use

(1) When working in the field, first assemble the sampling bottle onto the sampling rod.

(2) Connect the sampling rod again, there are four sections in total, and connect them through joints.

(3) After installation, water samples can be collected and two sampling bottles can be used alternately. When the sampling bottle reaches the sampling depth, pull the valve cable to open the valve for automatic water inlet. After completion, release the cable and the valve will automatically close After removal, transfer the collected water into a sampling bottle