Automatic water quality samplerIt is an intelligent device used for automatic collection, storage, and transmission of water samples, widely used in fields such as environmental monitoring, pollution source control, emergency response, and drinking water safety assurance.

　　Automatic water quality samplerCore functions:

Multi mode sampling:

Timed sampling: Automatically collect water samples at preset time intervals (such as once per hour).

Flow rate proportional sampling: linked with the flow meter, collect water samples according to the discharge water ratio (such as taking one bottle for every 100m ³ of wastewater discharged).

Event triggered sampling: When water quality parameters (such as pH, turbidity, COD) exceed the standard or undergo sudden changes, automatic sampling is triggered and evidence is retained.

Remote control sampling: By remotely issuing sampling instructions through cloud platforms or mobile apps, flexible scheduling can be achieved.

Sample protection:

Constant temperature refrigeration: Built in refrigeration system (4 ± 2 ℃) to prevent water sample deterioration and ensure the accuracy of test results.

Automatic cleaning and emptying: The pipeline is automatically cleaned before and after each sampling to avoid cross contamination.

Anti clogging design: using a high flow peristaltic pump and anti clogging pipeline, suitable for high turbidity water samples (such as sediment content>500 NTU).

Data Management and Transmission:

Data recording: Record information such as sampling time, location, sampling volume, water quality parameters, etc., and support data export and backup.

Remote monitoring: Real time remote monitoring and fault alarm can be achieved through RS232/RS485 communication interface or GPRS/CDMA module.