HTGYW-III Coke Moisture Analyzer | Coke Moisture Rapid Analyzer | Furnace Dust Moisture Analyzer | Coal Powder Moisture Analyzer
Product Introduction of Steel Moisture Rapid Analyzer:
The rapid moisture analyzer for coke in steel plants is developed based on the principle of drying and weighing. The drying and weighing methods adopted by it shorten the measurement time while maintaining measurement accuracy, solving problems such as severe measurement time lag and large non-contact measurement errors.
Application scope of steel moisture rapid analyzer:
Suitable for moisture analysis of raw materials and fuels such as coke, sintering mixtures, ball pellets, concentrate powder, raw coal, coal powder, furnace dust, fly ash, etc. in steel plants.
Features of the Steel Moisture Rapid Analyzer:
1. High measurement accuracy, fast time, low energy consumption, easy operation, not affected by environmental temperature and humidity, auxiliary equipment
2. Adopting far-infrared radiation heating method to improve thermal efficiency
3. It can significantly increase the drying temperature based on the physical and chemical properties of different materials
4. Drying and measurement are completed, and the measurement results are displayed as a percentage of moisture
5. The balance display screen has backlight function, which can easily read in low light conditions
6. Equipped with RS-232 interface for data communication
Specification parameters of steel moisture rapid analyzer:
Zui Large Weight: 1100g (Recommended Sample Weight: Bulk Material 50-300g, Coke 500-900g)
Balance accuracy: 0.01g,
Moisture accuracy: 0.1%
Measurement time: 10-15 minutes (bulk material), 20-30 minutes (block coke)
Response time: 1 second
Constant temperature range: 50-350 ℃
Constant temperature accuracy: ± 5 ℃
Working temperature: -10~40 ℃
Power supply: 220V, 50Hz
Whole machine power: 2kW
Dimensions: 290 × 450 × 460mm (Type A)
260 × 410 × 440mm (Type B, Type C)
Whole machine weight: 15kg (Type A)
13kg (Type B, Type C)
Note:
Type A is suitable for moisture analysis of coke in steel plants,
Type B is suitable for moisture analysis of iron ore powder, flux, bentonite, sintering and pellet process samples,
Type C is suitable for moisture analysis of raw coal and coal powder.
Standard configuration of steel moisture rapid analyzer:
1 set of moisture analyzer
Two circular stainless steel material trays
1 square sampling tray
One sampling shovel
1 clamp type material tray clamp
1 balance bracket
1 power socket (16A)
1 copy of user manual
1 certificate of conformity
1 data transmission cable
1 quick fuse core
1 insurance tube (2A)